Miele G 5915, G 5910 operating instructions Additional options, Delay start

Page 44

Additional options

Delay start

The starting time of a program can be delayed between 15 minutes and 24 hours. The start can be delayed in 15-minute-increments.

When using the "Delay Start" function make sure that the detergent compartment is dry before adding detergent, use a cloth if necessary. The detergent might stick together and not get completely rinsed out.

Do not use liquid detergent when selecting "Delay Start", the detergent could leak out of the compartment.

￿It is recommended to add the detergent and lock the dishwasher door to prevent children from coming in contact with the detergent.

￿Select the desired menu from the Main menu.

￿Select Delay start from the Program menu. The last set Start time is displayed.

￿

￿

Sensor Wash

 

1:32 h

12:00

￿

Options

 

 

+ ￿

 

 

 

 

-

 

￿

Start time

10:00

 

￿

 

End at

11:32

 

OK

￿

 

 

 

 

 

 

￿

￿

￿

￿Select the desired Start time with the +/- touch controls. Holding the button will automatically increase or decrease the time.

The end time will be automatically adjusted.

￿Confirm with OK.

44

Image 44
Contents Operating Instructions Dishwasher 5910 G Contents Contents Electrical Safety Correct usageInstallation Use Save These Instructions Disposal of an applianceGuide to the dishwasher Control panel Caring for the environment Energy saving washingBefore using for the first time Child Safety LockTo open the door To close the doorDisplay Clock format Welcome screenLanguage Time of day setting Water hardnessRinse aid and/or Add salt may Filling the salt container Salt refill message Rinse aid Adding rinse aidRinse aid indicator Loading the dishwasher Silver and aluminum Items not recommended for dishwashingGlassware Typical load for 10 place settings Typical load for 16 place settings Hinged cup rack Upper basketFoldable spikes Jumbo cup rack Universal support barAdjusting the height Adjusting the upper basket Lower basket Dishwasher with cutlery tray Heavily soiled itemsRemovable MultiComfort insert To remove the insertTo replace the insert Glass rackUniversal support bar Foldable spikes Vase / Bottle insertCutlery Split cutlery trayCutlery basket Cutlery insert for the cutlery basketOptional accessories MieleCare CollectionUse DetergentAdding detergent Turning on Selecting a programProgram guide When to use Program sequence Usage Normally soiled dishwareSelecting options Starting a program Time displayStandby At the end of a programPreparing your appliance for an extended vacation Interrupting a programChanging a program Delay start Additional optionsStarting a program before the delay start has elapsed BrilliantLight Opening the Settings menu SettingsSettings menu allows you to adjust standard settings Setting the clock format LanguageTime of day Display Time of dayWater hardness Adjust Sensor Wash Drying PlusCheck filters Optimize standbyRefill display Reorganize programs Save options Unlocking the dishwasher Temperature VolumeBrightness ContrastMemory RemoteVisionFactory default Leaving the Settings menuShowroom program Turning the Showroom program offRemoteVision Frequently asked questions Technical faultsFollowing Problem Possible fault Solution Buzzer soundsDisplay shows Frequently asked questions Problems water intake/drainProblem Possible fault Solution Program Following fault isFollowing error Energy SaverGeneral problems with the dishwasher Problem Possible fault Solution Display is darkInterior lighting is Not turned on whenProblem Possible fault Solution Detergent is left Dispenser at the endA program Detergent lidSounds Poor cleaning results Problem Possible fault Solution Dishes are not dry GlassesCutlery are SpottedProblem Possible fault Solution Glasses have a Brown or blueDiscoloration film Cannot be wiped off Glasses are dull Discolored filmAfter sales service PC UpdateRepairs MieleCareTransport User Maintenance Instructions Cleaning and Care ExteriorWash cabinet Door and the door sealCleaning the triple filter Triple filter systemCleaning and Care Cleaning the spray arms Removing the spray armsCleaning the drain pump and non-return valve Installation Instructions Disposal of an old machine Help to protect the environmentDisposal of the packing material Electrical connection Grounding InstructionsHardwired electrical connection Grounding Instructions This Appliance Must be GroundedPlumbing Connection to the water supplyDrainage Venting the drainage systemPage Alteration rights reserved Nr 909 210 G5910/G5915