Miele G 5910, G 5915 Showroom program, Factory default, Leaving the Settings menu

Page 57

Settings

Showroom program

Turning the Showroom program on

Demo modes are only for showrooms.

The dishwasher has various demo programs for showrooms.

The programs "Demo mode" and "Endless demo mode" show the use and function range of the dishwasher.

–Demo mode:

The program is started by pressing any button. It runs once and must be started again.

–Endless demo mode:

The program starts as soon as it is activated and runs in a loop until it is turned off.

–Demo wash sound:

The program activates the pumps to demonstrate the wash sound.

–Trade show mode:

Once the machine is used for the first time this option is disabled in the display.

–Drying Plus Demo:

The door opens automatically

Select the desired option, confirm with OK.

Confirm the following messages with

OK.

Press any button to start the selected demo mode.

To cancel the demo mode press any button again and confirm with OK.

Turning the Showroom program off

Select Off to deactivate the Showroom program and confirm with

OK.

Confirm the message Deactivate

demo mode? with OK.

Factory default

All settings can be reset to factory default.

Confirm the message Reset to

factory default? with OK.

Confirm the information All settings

are reset to factory default with OK.

Leaving the "Settings menu"

To leave the "Settings " touch the "Clear" control. The main menu appears.

57

Image 57

Contents Operating Instructions Dishwasher 5910 G Contents Contents Correct usage Electrical SafetyInstallation Use Disposal of an appliance Save These InstructionsGuide to the dishwasher Control panel Energy saving washing Caring for the environmentChild Safety Lock Before using for the first timeTo open the door To close the doorDisplay Welcome screen LanguageClock format Water hardness Time of day settingRinse aid and/or Add salt may Filling the salt container Salt refill message Adding rinse aid Rinse aidRinse aid indicator Loading the dishwasher Items not recommended for dishwashing GlasswareSilver and aluminum Typical load for 10 place settings Typical load for 16 place settings Upper basket Foldable spikesHinged cup rack Universal support bar Jumbo cup rackAdjusting the height Adjusting the upper basket Dishwasher with cutlery tray Heavily soiled items Lower basketTo remove the insert Removable MultiComfort insertTo replace the insert Glass rackVase / Bottle insert Universal support bar Foldable spikesSplit cutlery tray CutleryCutlery insert for the cutlery basket Cutlery basketMieleCare Collection Optional accessoriesDetergent UseAdding detergent Selecting a program Turning onProgram guide When to use Program sequence Normally soiled dishware UsageSelecting options Time display Starting a programAt the end of a program StandbyInterrupting a program Preparing your appliance for an extended vacationChanging a program Additional options Delay startStarting a program before the delay start has elapsed BrilliantLight Settings Settings menu allows you to adjust standard settingsOpening the Settings menu Language Setting the clock formatTime of day Display Time of dayWater hardness Drying Plus Adjust Sensor WashOptimize standby Refill displayCheck filters Reorganize programs Save options Unlocking the dishwasher Volume TemperatureContrast BrightnessMemory RemoteVisionLeaving the Settings menu Factory defaultShowroom program Turning the Showroom program offRemoteVision Technical faults Frequently asked questionsProblem Possible fault Solution Buzzer sounds Display showsFollowing Problems water intake/drain Frequently asked questionsFollowing fault is Problem Possible fault Solution ProgramFollowing error Energy SaverProblem Possible fault Solution Display is dark General problems with the dishwasherInterior lighting is Not turned on whenDispenser at the end Problem Possible fault Solution Detergent is leftA program Detergent lidSounds Poor cleaning results Glasses Problem Possible fault Solution Dishes are not dryCutlery are SpottedBrown or blue Problem Possible fault Solution Glasses have aDiscoloration film Cannot be wiped off Glasses are dull Discolored filmPC Update After sales serviceRepairs MieleCareTransport User Maintenance Instructions Exterior Cleaning and CareWash cabinet Door and the door sealTriple filter system Cleaning the triple filterCleaning and Care Removing the spray arms Cleaning the spray armsCleaning the drain pump and non-return valve Installation Instructions Help to protect the environment Disposal of the packing materialDisposal of an old machine Grounding Instructions Electrical connectionGrounding Instructions This Appliance Must be Grounded Hardwired electrical connectionConnection to the water supply PlumbingVenting the drainage system DrainagePage Alteration rights reserved Nr 909 210 G5910/G5915