Miele G 5915, G 5910 operating instructions Hardwired electrical connection

Page 80

Electrical connection

Hardwired electrical connection

It is possible to hardwire this appliance to an existing power cable.

CAUTION: Before servicing, disconnect the power supply by either removing the fuse, shutting off the power main or manually "tripping" the circuit breaker.

Installation work and repairs should only be performed by a qualified technician in accordance with all applicable codes and standards. Repairs and service by unqualified persons could be dangerous and the manufacturer cannot be held responsible.

Before connecting the appliance to the power supply, make sure that the voltage and frequency listed on the data plate correspond with the household electrical supply. This data must correspond to prevent machine damage. Consult an electrician if in doubt.

GROUNDING INSTRUCTIONS

THIS APPLIANCE MUST BE GROUNDED.

This appliance must be connected to a grounded metal, permanent wiring system, or an equipment-grounding conductor must be run with the circuit conductors and connected to the equipment-grounding terminal or lead on the appliance.

Prior to making a hardwire connection to the terminal, remove the power cord. Otherwise there will be a risk of electric shock from the attached plug.

An existing flexible supply cord or cable shall have a minimum thickness of AWG 14.

120 V, 60 Hz, 15 A fuse rating

Black wire (live):

connect to L

White wire (neutral): connect to N

Green wire (ground): connect to

After attaching the permanent power supply cord, check that all screws on the terminal block and the strain relief are tightened.

80

Image 80

Contents Operating Instructions Dishwasher 5910 G Contents Contents Electrical Safety Correct usageInstallation Use Save These Instructions Disposal of an applianceGuide to the dishwasher Control panel Caring for the environment Energy saving washingBefore using for the first time Child Safety LockTo open the door To close the doorDisplay Clock format Welcome screenLanguage Time of day setting Water hardnessRinse aid and/or Add salt may Filling the salt container Salt refill message Rinse aid Adding rinse aidRinse aid indicator Loading the dishwasher Silver and aluminum Items not recommended for dishwashingGlassware Typical load for 10 place settings Typical load for 16 place settings Hinged cup rack Upper basketFoldable spikes Jumbo cup rack Universal support barAdjusting the height Adjusting the upper basket Lower basket Dishwasher with cutlery tray Heavily soiled itemsRemovable MultiComfort insert To remove the insertTo replace the insert Glass rackUniversal support bar Foldable spikes Vase / Bottle insertCutlery Split cutlery trayCutlery basket Cutlery insert for the cutlery basketOptional accessories MieleCare CollectionUse DetergentAdding detergent Turning on Selecting a programProgram guide When to use Program sequence Usage Normally soiled dishwareSelecting options Starting a program Time displayStandby At the end of a programPreparing your appliance for an extended vacation Interrupting a programChanging a program Delay start Additional optionsStarting a program before the delay start has elapsed BrilliantLight Opening the Settings menu SettingsSettings menu allows you to adjust standard settings Setting the clock format LanguageTime of day Display Time of dayWater hardness Adjust Sensor Wash Drying PlusCheck filters Optimize standbyRefill display Reorganize programs Save options Unlocking the dishwasher Temperature VolumeBrightness ContrastMemory RemoteVisionFactory default Leaving the Settings menuShowroom program Turning the Showroom program offRemoteVision Frequently asked questions Technical faultsFollowing Problem Possible fault Solution Buzzer soundsDisplay shows Frequently asked questions Problems water intake/drainProblem Possible fault Solution Program Following fault isFollowing error Energy SaverGeneral problems with the dishwasher Problem Possible fault Solution Display is darkInterior lighting is Not turned on whenProblem Possible fault Solution Detergent is left Dispenser at the endA program Detergent lidSounds Poor cleaning results Problem Possible fault Solution Dishes are not dry GlassesCutlery are SpottedProblem Possible fault Solution Glasses have a Brown or blueDiscoloration film Cannot be wiped off Glasses are dull Discolored filmAfter sales service PC UpdateRepairs MieleCareTransport User Maintenance Instructions Cleaning and Care ExteriorWash cabinet Door and the door sealCleaning the triple filter Triple filter systemCleaning and Care Cleaning the spray arms Removing the spray armsCleaning the drain pump and non-return valve Installation Instructions Disposal of an old machine Help to protect the environmentDisposal of the packing material Electrical connection Grounding InstructionsHardwired electrical connection Grounding Instructions This Appliance Must be GroundedPlumbing Connection to the water supplyDrainage Venting the drainage systemPage Alteration rights reserved Nr 909 210 G5910/G5915