Miele G 5915, G 5910 Problem Possible fault Solution Buzzer sounds, Display shows, Following

Page 60

Frequently asked questions

Problem

Possible fault

Solution

The buzzer sounds.

 

Before trying to remedy the

The display shows the

 

fault:

following:

 

Open the door.

 

 

Turn the dishwasher off with

 

 

 

the ￿ button.

Technical fault FXX

There may be a

After a few seconds:

Contact Technical Ser-

technical fault.

Turn the dishwasher on.

vice

 

Select the desired program.

 

 

 

 

Close the door.

 

 

Select Start.

 

 

If the problem persists,

 

 

contact Technical Service.

Waterproof fault F70

The waterproof system

Turn off the water supply.

 

has activated.

Contact Miele Technical Ser-

 

 

vice.

Automatic door closing

The door may be

Remove the item, if

fault F32

blocked.

 

necessary restart the

 

 

 

 

 

program.

 

 

If the message shows again

 

 

contact Miele Technical Ser-

 

 

vice.

Automatic door opening

Possible technical fault.

Open the door by hand and

fault F33

 

 

restart the program.

 

 

 

 

 

If the message shows again

 

 

contact Miele Technical Ser-

 

 

vice.

60

Image 60
Contents Operating Instructions Dishwasher 5910 G Contents Contents Electrical Safety Correct usageInstallation Use Save These Instructions Disposal of an applianceGuide to the dishwasher Control panel Caring for the environment Energy saving washingBefore using for the first time Child Safety LockTo open the door To close the doorDisplay Welcome screen LanguageClock format Time of day setting Water hardnessRinse aid and/or Add salt may Filling the salt container Salt refill message Rinse aid Adding rinse aidRinse aid indicator Loading the dishwasher Items not recommended for dishwashing GlasswareSilver and aluminum Typical load for 10 place settings Typical load for 16 place settings Upper basket Foldable spikesHinged cup rack Jumbo cup rack Universal support barAdjusting the height Adjusting the upper basket Lower basket Dishwasher with cutlery tray Heavily soiled itemsRemovable MultiComfort insert To remove the insertTo replace the insert Glass rackUniversal support bar Foldable spikes Vase / Bottle insertCutlery Split cutlery trayCutlery basket Cutlery insert for the cutlery basketOptional accessories MieleCare CollectionUse DetergentAdding detergent Turning on Selecting a programProgram guide When to use Program sequence Usage Normally soiled dishwareSelecting options Starting a program Time displayStandby At the end of a programPreparing your appliance for an extended vacation Interrupting a programChanging a program Delay start Additional optionsStarting a program before the delay start has elapsed BrilliantLight Settings Settings menu allows you to adjust standard settingsOpening the Settings menu Setting the clock format LanguageTime of day Display Time of dayWater hardness Adjust Sensor Wash Drying PlusOptimize standby Refill displayCheck filters Reorganize programs Save options Unlocking the dishwasher Temperature VolumeBrightness ContrastMemory RemoteVisionFactory default Leaving the Settings menuShowroom program Turning the Showroom program offRemoteVision Frequently asked questions Technical faultsProblem Possible fault Solution Buzzer sounds Display showsFollowing Frequently asked questions Problems water intake/drainProblem Possible fault Solution Program Following fault isFollowing error Energy SaverGeneral problems with the dishwasher Problem Possible fault Solution Display is darkInterior lighting is Not turned on whenProblem Possible fault Solution Detergent is left Dispenser at the endA program Detergent lidSounds Poor cleaning results Problem Possible fault Solution Dishes are not dry GlassesCutlery are SpottedProblem Possible fault Solution Glasses have a Brown or blueDiscoloration film Cannot be wiped off Glasses are dull Discolored filmAfter sales service PC UpdateRepairs MieleCareTransport User Maintenance Instructions Cleaning and Care ExteriorWash cabinet Door and the door sealCleaning the triple filter Triple filter systemCleaning and Care Cleaning the spray arms Removing the spray armsCleaning the drain pump and non-return valve Installation Instructions Help to protect the environment Disposal of the packing materialDisposal of an old machine Electrical connection Grounding InstructionsHardwired electrical connection Grounding Instructions This Appliance Must be GroundedPlumbing Connection to the water supplyDrainage Venting the drainage systemPage Alteration rights reserved Nr 909 210 G5910/G5915