Miele G 5915 Problem Possible fault Solution Detergent is left, Dispenser at the end, A program

Page 64

Frequently asked questions

Problem

Possible fault

Solution

Detergent is left in the

The dispenser was damp

Dry the dispenser before

dispenser at the end

when detergent was

adding detergent.

of a program.

added.

 

The detergent lid

Detergent residue is

Remove the residue.

cannot be closed

blocking the catch.

 

properly.

 

 

The door and the

This is not a fault! It is the

The moisture will evaporate

interior walls are still

normal operating mode of

after a short time.

wet after a program

the drying system.

 

has finished.

 

 

Water remains in the

 

Before fixing the fault:

wash cabinet at the

 

– Turn the dishwasher off

end of a program.

 

￿.

 

The triple filter in the wash

Clean the triple filter. See

 

cabinet is clogged.

"User Maintenance

 

 

Instructions".

 

The drain pump or the

Clean the drain pump and

 

non-return valve may be

the non-return valve, see

 

blocked.

the "User Maintenance

 

 

Instructions".

 

The drain hose is kinked.

Remove any kinks from the

 

 

drain hose.

64

Image 64
Contents Operating Instructions Dishwasher 5910 G Contents Contents Electrical Safety Correct usageInstallation Use Save These Instructions Disposal of an applianceGuide to the dishwasher Control panel Caring for the environment Energy saving washingBefore using for the first time Child Safety LockTo open the door To close the doorDisplay Language Welcome screenClock format Time of day setting Water hardnessRinse aid and/or Add salt may Filling the salt container Salt refill message Rinse aid Adding rinse aidRinse aid indicator Loading the dishwasher Glassware Items not recommended for dishwashingSilver and aluminum Typical load for 10 place settings Typical load for 16 place settings Foldable spikes Upper basketHinged cup rack Jumbo cup rack Universal support barAdjusting the height Adjusting the upper basket Lower basket Dishwasher with cutlery tray Heavily soiled itemsRemovable MultiComfort insert To remove the insertTo replace the insert Glass rackUniversal support bar Foldable spikes Vase / Bottle insertCutlery Split cutlery trayCutlery basket Cutlery insert for the cutlery basketOptional accessories MieleCare CollectionUse DetergentAdding detergent Turning on Selecting a programProgram guide When to use Program sequence Usage Normally soiled dishwareSelecting options Starting a program Time displayStandby At the end of a programPreparing your appliance for an extended vacation Interrupting a programChanging a program Delay start Additional optionsStarting a program before the delay start has elapsed BrilliantLight Settings menu allows you to adjust standard settings SettingsOpening the Settings menu Setting the clock format LanguageTime of day Display Time of dayWater hardness Adjust Sensor Wash Drying PlusRefill display Optimize standbyCheck filters Reorganize programs Save options Unlocking the dishwasher Temperature VolumeBrightness ContrastMemory RemoteVisionFactory default Leaving the Settings menuShowroom program Turning the Showroom program offRemoteVision Frequently asked questions Technical faultsDisplay shows Problem Possible fault Solution Buzzer soundsFollowing Frequently asked questions Problems water intake/drainProblem Possible fault Solution Program Following fault isFollowing error Energy SaverGeneral problems with the dishwasher Problem Possible fault Solution Display is darkInterior lighting is Not turned on whenProblem Possible fault Solution Detergent is left Dispenser at the endA program Detergent lidSounds Poor cleaning results Problem Possible fault Solution Dishes are not dry GlassesCutlery are SpottedProblem Possible fault Solution Glasses have a Brown or blueDiscoloration film Cannot be wiped off Glasses are dull Discolored filmAfter sales service PC UpdateRepairs MieleCareTransport User Maintenance Instructions Cleaning and Care ExteriorWash cabinet Door and the door sealCleaning the triple filter Triple filter systemCleaning and Care Cleaning the spray arms Removing the spray armsCleaning the drain pump and non-return valve Installation Instructions Disposal of the packing material Help to protect the environmentDisposal of an old machine Electrical connection Grounding InstructionsHardwired electrical connection Grounding Instructions This Appliance Must be GroundedPlumbing Connection to the water supplyDrainage Venting the drainage systemPage Alteration rights reserved Nr 909 210 G5910/G5915