Miele G 5915 Problem Possible fault Solution Program, Energy Saver, Following fault is, Displayed

Page 62

Frequently asked questions

Problem

Possible fault

Solution

In the program

The intake water does not

– Restart the program.

"Energy Saver" the

have a minimum

– If the fault is displayed

following fault is

temperature of 115°F

again, use a different

displayed:

(45°C). See "Plumbing".

program.

Water intake temp. too

 

 

low

 

 

The buzzer sounds.

 

Before fixing the fault:

The display shows

 

– Turn the dishwasher off

the following error

 

with the ￿ button.

message:

Fault in the water drain.

– Clean the triple filter.

Drain fault F11

There might be water in

– Clean the drain pump and

 

 

the wash cabinet.

the non-return valve.

 

 

See "User Maintenance

 

 

Instructions" for more

 

 

information on the above.

 

 

– Remove any kinks in the

 

 

drain hose.

62

Image 62
Contents Operating Instructions Dishwasher 5910 G Contents Contents Electrical Safety Correct usageInstallation Use Save These Instructions Disposal of an applianceGuide to the dishwasher Control panel Caring for the environment Energy saving washingTo open the door Before using for the first timeChild Safety Lock To close the doorDisplay Clock format Welcome screenLanguage Time of day setting Water hardnessRinse aid and/or Add salt may Filling the salt container Salt refill message Rinse aid Adding rinse aidRinse aid indicator Loading the dishwasher Silver and aluminum Items not recommended for dishwashingGlassware Typical load for 10 place settings Typical load for 16 place settings Hinged cup rack Upper basketFoldable spikes Jumbo cup rack Universal support barAdjusting the height Adjusting the upper basket Lower basket Dishwasher with cutlery tray Heavily soiled itemsTo replace the insert Removable MultiComfort insertTo remove the insert Glass rackUniversal support bar Foldable spikes Vase / Bottle insertCutlery Split cutlery trayCutlery basket Cutlery insert for the cutlery basketOptional accessories MieleCare CollectionUse DetergentAdding detergent Turning on Selecting a programProgram guide When to use Program sequence Usage Normally soiled dishwareSelecting options Starting a program Time displayStandby At the end of a programPreparing your appliance for an extended vacation Interrupting a programChanging a program Delay start Additional optionsStarting a program before the delay start has elapsed BrilliantLight Opening the Settings menu SettingsSettings menu allows you to adjust standard settings Time of day Setting the clock formatLanguage Display Time of dayWater hardness Adjust Sensor Wash Drying PlusCheck filters Optimize standbyRefill display Reorganize programs Save options Unlocking the dishwasher Temperature VolumeMemory BrightnessContrast RemoteVisionShowroom program Factory defaultLeaving the Settings menu Turning the Showroom program offRemoteVision Frequently asked questions Technical faultsFollowing Problem Possible fault Solution Buzzer soundsDisplay shows Frequently asked questions Problems water intake/drainFollowing error Problem Possible fault Solution ProgramFollowing fault is Energy SaverInterior lighting is General problems with the dishwasherProblem Possible fault Solution Display is dark Not turned on whenA program Problem Possible fault Solution Detergent is leftDispenser at the end Detergent lidSounds Poor cleaning results Cutlery are Problem Possible fault Solution Dishes are not dryGlasses SpottedDiscoloration film Cannot be wiped off Glasses are dull Problem Possible fault Solution Glasses have aBrown or blue Discolored filmRepairs After sales servicePC Update MieleCareTransport User Maintenance Instructions Wash cabinet Cleaning and CareExterior Door and the door sealCleaning the triple filter Triple filter systemCleaning and Care Cleaning the spray arms Removing the spray armsCleaning the drain pump and non-return valve Installation Instructions Disposal of an old machine Help to protect the environmentDisposal of the packing material Electrical connection Grounding InstructionsHardwired electrical connection Grounding Instructions This Appliance Must be GroundedPlumbing Connection to the water supplyDrainage Venting the drainage systemPage Alteration rights reserved Nr 909 210 G5910/G5915