Miele G 2732 manual Rinse aid, Adding rinse aid

Page 15

Before using for the first time

Rinse aid

Rinse aid helps to prevent spotting on dishes and glassware.

The rinse aid is filled in the reservoir and the set amount will be automatically dosed.

Filling the rinse aid reservoir with detergent will damage the reservoir. Only pour rinse aid formulated for residential dishwashers into the reservoir.

When using "Tab" detergents rinse aid is not needed.

Adding rinse aid

Press the button in the direction of the arrow until the flap springs open.

Pour liquid rinse aid into the reservoir until it is visible on the surface of the screen.

The rinse aid reservoir holds approx. 3.7 oz (110 ml).

Press on the flap until you hear it click shut. Failure to close it all the way allows water to enter the reservoir during the wash program.

Clean any spilled rinse aid. The flap will remain closed during normal operation.

To optimize the wash result, the rinse aid dosage can be adjusted. See "Settings - Rinse aid".

15

Image 15

Contents Operating Instructions Dishwasher 2732 Contents Contents Electrical Safety Important Safety InstructionsInstallation Disposal of an appliance UseGuide to the dishwasher Control panel Display function Energy saving washing Caring for the environmentBefore using for the first time To open the door Child Safety LockTo close the door 1200 External water softener Water softenerSalt refill message Filling the salt containerAdding rinse aid Rinse aidRinse aid refill message Loading the dishwasher Items not recommended for dishwashing GlasswareSilver and aluminum Split cutlery tray Replacing the insert Upper basketRemovable spike insert Removing the insertCoffee bar Adjustable cup racksUniversal support bar Adjusting the upper basket Foldable spikes Lower basketRemovable PlateGuard Plus with StemGuard Vase / Bottle insert Basket accessories Detergent UseAdding detergent Selecting a program Turning onProgram guide Program When to use Program sequenceTo normally soiled UsageSoak Selecting optionsTurbo Pre-rinseTime display Starting a programPreparing your appliance for an extended vacaion At the end of a programChanging a program Interrupting a programDelay Start Starting a program before the delay start has elapsedAdditional options Settings Opening the Settings menuLanguage Time of day Water hardness Filter check Adjust Sensor WashSave options Reorganize program listUnlocking the dishwasher TemperatureBuzzer at the end of a program Buzzer in case of a faultBuzzer volume BuzzerRemoteVision Button tone MemoryBrightness ContrastTurning the demo mode off Factory defaultLeaving the Settings menu Turning the demo mode onRemoteVision Technical faults Frequently asked questionsProblems water intake/drain Frequently asked questionsIssue Possible fault Solution Buzzer sounds. Displays the faultProgram Energy Saver Issue Possible fault Solution Display turns off General problems with the dishwasherDetergent lid cannot Issue Possible fault Solution Detergent is leftDispenser at the end of a ProgramSounds Poor cleaning results White residue is Issue Possible fault Solution Dishes are not dryGlasses and cutlery Are spottedGlasses are dull Issue Possible fault Solution Glasses areDiscolored Film cannot be wiped Off Clouding or etching On glassesComparison Tests Comparison Tests MieleCare After sales servicePC Update RepairsTransport User Maintenance Instructions Door and the door seal Cleaning and CareExterior Wash cabinetTriple filter system Cleaning the triple filterCleaning and Care Removing the spray arms Cleaning the spray armsCleaning the water inlet filter Installing an in-line water filterCleaning the filter Cleaning the drain pump and non-return valve Page Installation Instructions Help to protect the environment Disposal of the packing materialDisposal of an old machine Grounding Instructions Electrical connectionPlumbing Waterproof systemConnection to the water supply Venting the drainage system DrainagePage Page Alteration rights reserved Nr 724 110 2732