Settings
Button tone | Memory |
A tone will sound when a button is pressed.
The volume can be set to seventeen different levels. It is set to level 8 by default.
Select the desired setting and confirm with "OK".
Brightness
The display brightness can be adjusted in 17 levels.
The brightness is set to level 9 by default.
Select the desired brightness and confirm with "OK".
Contrast
The display contrast can be adjusted in 17 levels.
The contrast is set to level 9 by default.
Select the desired contrast and confirm with "OK".
The memory function allows you to save the last selected program.
When turning the dishwasher off and on again after a program has finished or opening and closing the door, the last selected program is displayed instead of the main menu.
The function is turned on by default.
Select the desired option and confirm with "OK".
RemoteVision
(Optional accessory.
To learn more about RemoteVision visit www.miele.com.)
Select to show module state.
If " module connected and ready" is displayed, no further action is required.
Via the "Options" menu you can:
–Reboot the module
–Reset the factory default settings
–Enter
Refer to the "RemoteVision" section of this manual or the RemoteVision Installation manual for further instructions.
45