Miele G 2732 manual Starting a program, Time display

Page 34

Use

Starting a program

Press the "Start" button.

The program begins and the "Start" indicator lights.

Cancel a program only in the first few minutes. Otherwise important program steps (e.g. the water softening) could be interrupted.

Time display

Before the program starts, the time display shows the running time of the selected program in hours and minutes. During the running program the remaining time is shown in the display.

The running time for the same program may vary depending on the intake water temperature, load size and soiling.

When a program is selected for the first time, a time is shown which equals an average program running time with cold water.

Each time a program is run, the electronic adjusts the program running time according to the intake water temperature and the load size.

The current time of day, the remaining and end time of the program can be displayed during the running program.

Press the button.

To change back to the main menu press again.

34

Image 34

Contents Operating Instructions Dishwasher 2732 Contents Contents Important Safety Instructions Electrical SafetyInstallation Use Disposal of an applianceGuide to the dishwasher Control panel Display function Caring for the environment Energy saving washingTo open the door Child Safety Lock Before using for the first timeTo close the door 1200 Water softener External water softenerFilling the salt container Salt refill messageRinse aid Adding rinse aidRinse aid refill message Loading the dishwasher Glassware Items not recommended for dishwashingSilver and aluminum Split cutlery tray Removing the insert Upper basketRemovable spike insert Replacing the insertAdjustable cup racks Coffee barUniversal support bar Adjusting the upper basket Lower basket Foldable spikesRemovable PlateGuard Plus with StemGuard Vase / Bottle insert Basket accessories Use DetergentAdding detergent Turning on Selecting a programProgram When to use Program sequence Program guideUsage To normally soiledPre-rinse Selecting optionsTurbo SoakStarting a program Time displayAt the end of a program Preparing your appliance for an extended vacaionInterrupting a program Changing a programStarting a program before the delay start has elapsed Delay StartAdditional options Opening the Settings menu SettingsLanguage Time of day Water hardness Adjust Sensor Wash Filter checkReorganize program list Save optionsTemperature Unlocking the dishwasherBuzzer Buzzer in case of a faultBuzzer volume Buzzer at the end of a programContrast Button tone MemoryBrightness RemoteVisionTurning the demo mode on Factory defaultLeaving the Settings menu Turning the demo mode offRemoteVision Frequently asked questions Technical faultsFrequently asked questions Problems water intake/drainDisplays the fault Issue Possible fault Solution Buzzer sounds.Program Energy Saver General problems with the dishwasher Issue Possible fault Solution Display turns offProgram Issue Possible fault Solution Detergent is leftDispenser at the end of a Detergent lid cannotSounds Poor cleaning results Are spotted Issue Possible fault Solution Dishes are not dryGlasses and cutlery White residue isOn glasses Issue Possible fault Solution Glasses areDiscolored Film cannot be wiped Off Clouding or etching Glasses are dullComparison Tests Comparison Tests Repairs After sales servicePC Update MieleCareTransport User Maintenance Instructions Wash cabinet Cleaning and CareExterior Door and the door sealCleaning the triple filter Triple filter systemCleaning and Care Cleaning the spray arms Removing the spray armsInstalling an in-line water filter Cleaning the water inlet filterCleaning the filter Cleaning the drain pump and non-return valve Page Installation Instructions Disposal of the packing material Help to protect the environmentDisposal of an old machine Electrical connection Grounding InstructionsWaterproof system PlumbingConnection to the water supply Drainage Venting the drainage systemPage Page Alteration rights reserved Nr 724 110 2732