Miele G 2732 manual Filter check, Adjust Sensor Wash

Page 41

Settings

Rinse aid

For best results the rinse aid dosage can be adjusted.

The dosage can be set between 0 and 6 ml.

The dosage set by default to 3 ml of rinse aid per program.

–Use a higher setting if spots appear on dry glassware.

–Use a lower setting if streaking appears on dishes or glasses.

Select the desired rinse aid amount and confirm with "OK".

Filter check

This selection allows you to set the number of cycles run before the filter check message shows.

You can select between 30 and 60 cycles.

The filter check message is set by default to 40 cycles.

Select the desired number of cycles and confirm with "OK".

See "Cleaning and Care - Triple filter system" for more information.

Adjust Sensor Wash

The "Sensor Wash" program can be adjusted to clean stubborn but normal soiling.

Select Yes and confirm with "OK" .

41

Image 41

Contents Operating Instructions Dishwasher 2732 Contents Contents Electrical Safety Important Safety InstructionsInstallation Disposal of an appliance UseGuide to the dishwasher Control panel Display function Energy saving washing Caring for the environmentTo close the door Before using for the first timeTo open the door Child Safety Lock 1200 External water softener Water softenerSalt refill message Filling the salt containerAdding rinse aid Rinse aidRinse aid refill message Loading the dishwasher Silver and aluminum Items not recommended for dishwashingGlassware Split cutlery tray Removable spike insert Upper basketRemoving the insert Replacing the insertCoffee bar Adjustable cup racksUniversal support bar Adjusting the upper basket Foldable spikes Lower basketRemovable PlateGuard Plus with StemGuard Vase / Bottle insert Basket accessories Detergent UseAdding detergent Selecting a program Turning onProgram guide Program When to use Program sequenceTo normally soiled UsageTurbo Selecting optionsPre-rinse SoakTime display Starting a programPreparing your appliance for an extended vacaion At the end of a programChanging a program Interrupting a programAdditional options Delay StartStarting a program before the delay start has elapsed Language SettingsOpening the Settings menu Time of day Water hardness Filter check Adjust Sensor WashSave options Reorganize program listUnlocking the dishwasher TemperatureBuzzer volume Buzzer in case of a faultBuzzer Buzzer at the end of a programBrightness Button tone MemoryContrast RemoteVisionLeaving the Settings menu Factory defaultTurning the demo mode on Turning the demo mode offRemoteVision Technical faults Frequently asked questionsProblems water intake/drain Frequently asked questionsProgram Energy Saver Issue Possible fault Solution Buzzer sounds.Displays the fault Issue Possible fault Solution Display turns off General problems with the dishwasherDispenser at the end of a Issue Possible fault Solution Detergent is leftProgram Detergent lid cannotSounds Poor cleaning results Glasses and cutlery Issue Possible fault Solution Dishes are not dryAre spotted White residue isDiscolored Film cannot be wiped Off Clouding or etching Issue Possible fault Solution Glasses areOn glasses Glasses are dullComparison Tests Comparison Tests PC Update After sales serviceRepairs MieleCareTransport User Maintenance Instructions Exterior Cleaning and CareWash cabinet Door and the door sealTriple filter system Cleaning the triple filterCleaning and Care Removing the spray arms Cleaning the spray armsCleaning the filter Cleaning the water inlet filterInstalling an in-line water filter Cleaning the drain pump and non-return valve Page Installation Instructions Disposal of an old machine Help to protect the environmentDisposal of the packing material Grounding Instructions Electrical connectionConnection to the water supply PlumbingWaterproof system Venting the drainage system DrainagePage Page Alteration rights reserved Nr 724 110 2732