Miele G 2732 manual At the end of a program, Preparing your appliance for an extended vacaion

Page 35

Use

At the end of a program

At the end of a program the display shows End.

Dishes tends to chip if removed still hot from the dishwasher.

Let the dishware cool.

After turning off the dishwasher open the door slightly. The dishes will cool much faster.

Unload the dishwasher.

Unloading the lower basket first will prevent water drops from the upper basket and cutlery tray (depending on model) from dropping onto dishes in the lower basket.

Turn the dishwasher off .

The dishwasher continues to use electricity until turned off with the button.

Preparing your appliance for an extended vacaion

If you elect to turn off the water to your home for an extended period of time, please note that this may not be enough to reduce the risk of a leak.

To be completely safe, you must turn off the water supply to each individual appliance. This means under the sink for a dishwasher, at the laundry bib for your washer, etc.

35

Image 35

Contents Operating Instructions Dishwasher 2732 Contents Contents Electrical Safety Important Safety InstructionsInstallation Disposal of an appliance UseGuide to the dishwasher Control panel Display function Energy saving washing Caring for the environmentTo close the door Before using for the first timeTo open the door Child Safety Lock 1200 External water softener Water softenerSalt refill message Filling the salt containerAdding rinse aid Rinse aidRinse aid refill message Loading the dishwasher Silver and aluminum Items not recommended for dishwashingGlassware Split cutlery tray Replacing the insert Upper basketRemovable spike insert Removing the insertCoffee bar Adjustable cup racksUniversal support bar Adjusting the upper basket Foldable spikes Lower basketRemovable PlateGuard Plus with StemGuard Vase / Bottle insert Basket accessories Detergent UseAdding detergent Selecting a program Turning onProgram guide Program When to use Program sequenceTo normally soiled UsageSoak Selecting optionsTurbo Pre-rinseTime display Starting a programPreparing your appliance for an extended vacaion At the end of a programChanging a program Interrupting a programAdditional options Delay StartStarting a program before the delay start has elapsed Language SettingsOpening the Settings menu Time of day Water hardness Filter check Adjust Sensor WashSave options Reorganize program listUnlocking the dishwasher TemperatureBuzzer at the end of a program Buzzer in case of a faultBuzzer volume BuzzerRemoteVision Button tone MemoryBrightness ContrastTurning the demo mode off Factory defaultLeaving the Settings menu Turning the demo mode onRemoteVision Technical faults Frequently asked questionsProblems water intake/drain Frequently asked questionsProgram Energy Saver Issue Possible fault Solution Buzzer sounds.Displays the fault Issue Possible fault Solution Display turns off General problems with the dishwasherDetergent lid cannot Issue Possible fault Solution Detergent is leftDispenser at the end of a ProgramSounds Poor cleaning results White residue is Issue Possible fault Solution Dishes are not dryGlasses and cutlery Are spottedGlasses are dull Issue Possible fault Solution Glasses areDiscolored Film cannot be wiped Off Clouding or etching On glassesComparison Tests Comparison Tests MieleCare After sales servicePC Update RepairsTransport User Maintenance Instructions Door and the door seal Cleaning and CareExterior Wash cabinetTriple filter system Cleaning the triple filterCleaning and Care Removing the spray arms Cleaning the spray armsCleaning the filter Cleaning the water inlet filterInstalling an in-line water filter Cleaning the drain pump and non-return valve Page Installation Instructions Disposal of an old machine Help to protect the environmentDisposal of the packing material Grounding Instructions Electrical connectionConnection to the water supply PlumbingWaterproof system Venting the drainage system DrainagePage Page Alteration rights reserved Nr 724 110 2732