Miele G 2732 manual Frequently asked questions, Technical faults

Page 48

Frequently asked questions

With the aid of the following guide, minor problems can be fixed without a service call.

Repairs should only be carried out by a qualified and trained person in accordance with local and national safety regulations. Unauthorized repairs could cause personal injury or machine damage.

Technical faults

	Issue	Possible fault	Solution
	After the dishwasher was	The machine is not	Insert the plug.
	turned on with , the	plugged in.
	display stays off and the	The fuse has	Reset the circuit breaker.
	"Start" indicator does not	The fuse has	Reset the circuit breaker.
	"Start" indicator does not	tripped.	See data plate for minimum
	flash.		amperage.
			amperage.
	The dishwasher stops	The fuse has	Reset the circuit breaker.
	during a program.	tripped.	See data plate for minimum
			amperage.
	The buzzer sounds.	There may be a	Turn the dishwasher off .
	The display shows the	technical fault.	After a few seconds:
	following:		–	Turn the dishwasher on.
	Technical fault FXX		–	Turn the dishwasher on.
	Technical fault FXX		–	Select the desired program
	Call Technical Service		–	Select the desired program
	Call Technical Service			with the program selection
				with the program selection
				buttons.
			–	Press the "Start" button.
			If the problem persists, call
			Technical Service.
	The buzzer sounds.	The waterproof	– Turn off the water supply.
	The display shows the	system has	–	Contact Miele Technical
	following:	activated.		Service.
	Fault
	Waterproof F70
	Close water faucet

48

Image 48

Contents Operating Instructions Dishwasher 2732 Contents Contents Important Safety Instructions Electrical SafetyInstallation Use Disposal of an applianceGuide to the dishwasher Control panel Display function Caring for the environment Energy saving washingBefore using for the first time To open the door Child Safety LockTo close the door 1200 Water softener External water softenerFilling the salt container Salt refill messageRinse aid Adding rinse aidRinse aid refill message Loading the dishwasher Items not recommended for dishwashing GlasswareSilver and aluminum Split cutlery tray Upper basket Removable spike insertRemoving the insert Replacing the insertAdjustable cup racks Coffee barUniversal support bar Adjusting the upper basket Lower basket Foldable spikesRemovable PlateGuard Plus with StemGuard Vase / Bottle insert Basket accessories Use DetergentAdding detergent Turning on Selecting a programProgram When to use Program sequence Program guideUsage To normally soiledSelecting options TurboPre-rinse SoakStarting a program Time displayAt the end of a program Preparing your appliance for an extended vacaionInterrupting a program Changing a programDelay Start Starting a program before the delay start has elapsedAdditional options Settings Opening the Settings menuLanguage Time of day Water hardness Adjust Sensor Wash Filter checkReorganize program list Save optionsTemperature Unlocking the dishwasherBuzzer in case of a fault Buzzer volumeBuzzer Buzzer at the end of a programButton tone Memory BrightnessContrast RemoteVisionFactory default Leaving the Settings menuTurning the demo mode on Turning the demo mode offRemoteVision Frequently asked questions Technical faultsFrequently asked questions Problems water intake/drainIssue Possible fault Solution Buzzer sounds. Displays the faultProgram Energy Saver General problems with the dishwasher Issue Possible fault Solution Display turns offIssue Possible fault Solution Detergent is left Dispenser at the end of aProgram Detergent lid cannotSounds Poor cleaning results Issue Possible fault Solution Dishes are not dry Glasses and cutleryAre spotted White residue isIssue Possible fault Solution Glasses are Discolored Film cannot be wiped Off Clouding or etchingOn glasses Glasses are dullComparison Tests Comparison Tests After sales service PC UpdateRepairs MieleCareTransport User Maintenance Instructions Cleaning and Care ExteriorWash cabinet Door and the door sealCleaning the triple filter Triple filter systemCleaning and Care Cleaning the spray arms Removing the spray armsCleaning the water inlet filter Installing an in-line water filterCleaning the filter Cleaning the drain pump and non-return valve Page Installation Instructions Help to protect the environment Disposal of the packing materialDisposal of an old machine Electrical connection Grounding InstructionsPlumbing Waterproof systemConnection to the water supply Drainage Venting the drainage systemPage Page Alteration rights reserved Nr 724 110 2732