Miele G 2732 manual Buzzer at the end of a program, Buzzer in case of a fault, Buzzer volume

Page 44

Settings ￿

Buzzer ￿

When the buzzer is activated, a tone sounds at the end of a program and if a fault occurs.

The buzzer at the end of a program is turned on by default.

Buzzer at the end of a program

The buzzer at the end of a program sounds five times in intervals with a brief break in between. The buzzer sounds up to one hour if the dishwasher in not turned off.

Buzzer in case of a fault

The buzzer for a fault sounds continuously. The buzzer sounds up to two minutes if the dishwasher is not turned off or the fault is fixed.

The buzzer for a fault cannot be set to off.

Buzzer volume

Two buzzer volumes can be selected or the buzzer can be turned off.

Off

The buzzer tone at the end of a program is turned off.

Soft

The tone sounds in a soft volume.

Loud

The tone sounds in a loud volume.

￿Select the desired volume or deactivate the buzzer.

￿Confirm with "OK".

44

Image 44
Contents Operating Instructions Dishwasher 2732 Contents Contents Important Safety Instructions Electrical SafetyInstallation Use Disposal of an applianceGuide to the dishwasher Control panel Display function Caring for the environment Energy saving washingTo close the door Before using for the first timeTo open the door Child Safety Lock 1200 Water softener External water softenerFilling the salt container Salt refill messageRinse aid Adding rinse aidRinse aid refill message Loading the dishwasher Silver and aluminum Items not recommended for dishwashingGlassware Split cutlery tray Upper basket Removable spike insertRemoving the insert Replacing the insertAdjustable cup racks Coffee barUniversal support bar Adjusting the upper basket Lower basket Foldable spikesRemovable PlateGuard Plus with StemGuard Vase / Bottle insert Basket accessories Use DetergentAdding detergent Turning on Selecting a programProgram When to use Program sequence Program guideUsage To normally soiledSelecting options TurboPre-rinse SoakStarting a program Time displayAt the end of a program Preparing your appliance for an extended vacaionInterrupting a program Changing a programAdditional options Delay StartStarting a program before the delay start has elapsed Language SettingsOpening the Settings menu Time of day Water hardness Adjust Sensor Wash Filter checkReorganize program list Save optionsTemperature Unlocking the dishwasherBuzzer in case of a fault Buzzer volumeBuzzer Buzzer at the end of a programButton tone Memory BrightnessContrast RemoteVisionFactory default Leaving the Settings menuTurning the demo mode on Turning the demo mode offRemoteVision Frequently asked questions Technical faultsFrequently asked questions Problems water intake/drainProgram Energy Saver Issue Possible fault Solution Buzzer sounds.Displays the fault General problems with the dishwasher Issue Possible fault Solution Display turns offIssue Possible fault Solution Detergent is left Dispenser at the end of aProgram Detergent lid cannotSounds Poor cleaning results Issue Possible fault Solution Dishes are not dry Glasses and cutleryAre spotted White residue isIssue Possible fault Solution Glasses are Discolored Film cannot be wiped Off Clouding or etchingOn glasses Glasses are dullComparison Tests Comparison Tests After sales service PC UpdateRepairs MieleCareTransport User Maintenance Instructions Cleaning and Care ExteriorWash cabinet Door and the door sealCleaning the triple filter Triple filter systemCleaning and Care Cleaning the spray arms Removing the spray armsCleaning the filter Cleaning the water inlet filterInstalling an in-line water filter Cleaning the drain pump and non-return valve Page Installation Instructions Disposal of an old machine Help to protect the environmentDisposal of the packing material Electrical connection Grounding InstructionsConnection to the water supply PlumbingWaterproof system Drainage Venting the drainage systemPage Page Alteration rights reserved Nr 724 110 2732