Miele G 5770, G 5775 manual Cutlery, Split cutlery tray

Page 29

Loading the dishwasher

Cutlery

Split cutlery tray

(depending on model)

Arrange the cutlery as shown in the cutlery tray.

For easier unloading cutlery should be grouped in zones, one for knives, one for forks, one for spoons, etc.

Spoon heads should be placed in contact with at least one of the serrated retainers on the base of the cutlery tray to ensure that water runs off them freely.

The upper spray arm must not be blocked by tall cutlery items (e.g. cake servers).

The side sections of the tray can be moved into the middle to accommodate tall dishware items in the upper basket.

Spoons with thick handles may have to be placed as knives and forks with their heads in the holders.

You can use the yellow slide to adjust the height of the middle section of the cutlery tray to make more room for large items of cutlery.

29

Image 29

Contents Operating Instructions Dishwasher 5770 G Contents Contents Correct usage Electrical SafetyInstallation Use Disposal of an appliance Save These InstructionsGuide to the dishwasher Control panel Energy saving washing Caring for the environmentTo close the door Before using for the first timeTo open the door Display Settings menuWater hardness LanguageFilling the salt container Refill salt message Adding rinse aid Rinse aidRinse aid indicator Loading the dishwasher Silver and aluminum Items not recommended for dishwashingGlassware Typical load for 10 place settings Typical load for 16 place settings Hinged cup rack Upper basketFoldable spikes Universal support bar Jumbo cup rackAdjusting the height Adjusting the upper basket Lower basket To remove the insert Removable MultiComfort insertTo replace the insert Glass rackFoldable spikes Split cutlery tray CutleryCutlery insert for the cutlery basket Cutlery basketMieleCare Collection Optional accessoriesDetergent UseAdding detergent Starting a program Turning onSelecting a program Program Guide Program guide When to use Program sequenceStandby Time displayPreparing your appliance for an extended vacation At the end of a programChanging a program Interrupting a programTurbo Additional optionsIntensive lower basket Delay start Starting a program before the Delay start has elapsed Language Settings menuWater hardness Buzzer volume Buzzer in case of a faultBuzzer Buzzer at the end of a programOptimize standby Drying PlusSoak Deactivate indicatorsPre-rinse Extended dryingLeaving the Settings menu Factory defaultContrast Filter checkTechnical faults Frequently Asked QuestionsProblem Possible fault Solution One of the following Faults in the water intake/water drainGeneral problems with the dishwasher Sounds Poor cleaning results Glasses Problem Possible fault Solution Dishes are not dryCutlery are SpottedBrown or blue Problem Possible fault Solution Glasses have aDiscoloration film Cannot be wiped off Glasses are dull Discolored filmPC Update After sales serviceRepairs MieleCareTransport User Maintenance Instructions Exterior Cleaning and CareWash cabinet Door and the door sealIndicator reflector Triple filter system Cleaning the triple filterCleaning and Care Removing the spray arms Cleaning the spray armsCleaning the drain pump and non-return valve Page Installation Instructions Disposal of an old machine Help to protect the environmentDisposal of the packing material Grounding Instructions Electrical connectionGrounding Instructions This Appliance Must be Grounded Hardwired electrical connectionConnection to the water supply PlumbingVenting the drainage system DrainagePage Alteration rights reserved Nr 909 250 G5770/G5775