Miele G 5775, G 5770 manual Triple filter system, Cleaning the triple filter

Page 60

Cleaning and Care

Triple filter system

The triple filter system in the base of the wash cabinet retains coarse dirt from the suds solution, preventing it from reaching the circulation system and re-entering the cabinet through the spray arms.

The dishwasher must not be used without all the filters in place.

Collection of coarse dirt may cause the filters to clog. The level of soiling and time it takes before the filters need cleaning will vary depending on your household use.

The message Check filters will appear in the display after every 50 program cycles (factory default setting).

The filter check frequency can be set from 30 and 60 program cycles (see "Settings, filter check").

Check the triple filter system.

Clean the triple filter, if necessary.

Confirm the message with the center button.

The display changes to the Main menu.

Cleaning the triple filter

Turn the dishwasher off.

Turn the handle counter-clockwise to release the triple filter system .

Remove the triple filter system from the machine . Clean any solid particles and rinse the filter well under running water. Scrub with a nylon brush if necessary.

Make sure that when cleaning the filters, no coarse dirt falls into the circulation system, causing a blockage.

60

Image 60

Contents Operating Instructions Dishwasher 5770 G Contents Contents Electrical Safety Correct usageInstallation Use Save These Instructions Disposal of an applianceGuide to the dishwasher Control panel Caring for the environment Energy saving washingBefore using for the first time To open the doorTo close the door Settings menu DisplayLanguage Water hardnessFilling the salt container Refill salt message Rinse aid Adding rinse aidRinse aid indicator Loading the dishwasher Items not recommended for dishwashing GlasswareSilver and aluminum Typical load for 10 place settings Typical load for 16 place settings Upper basket Foldable spikesHinged cup rack Jumbo cup rack Universal support barAdjusting the height Adjusting the upper basket Lower basket Removable MultiComfort insert To remove the insertTo replace the insert Glass rackFoldable spikes Cutlery Split cutlery trayCutlery basket Cutlery insert for the cutlery basketOptional accessories MieleCare CollectionUse DetergentAdding detergent Turning on Selecting a programStarting a program Program guide When to use Program sequence Program GuideTime display StandbyAt the end of a program Preparing your appliance for an extended vacationInterrupting a program Changing a programAdditional options Intensive lower basketTurbo Delay start Starting a program before the Delay start has elapsed Settings menu LanguageWater hardness Buzzer in case of a fault Buzzer volumeBuzzer Buzzer at the end of a programDrying Plus Optimize standbyDeactivate indicators SoakPre-rinse Extended dryingFactory default Leaving the Settings menuContrast Filter checkFrequently Asked Questions Technical faultsFaults in the water intake/water drain Problem Possible fault Solution One of the followingGeneral problems with the dishwasher Sounds Poor cleaning results Problem Possible fault Solution Dishes are not dry GlassesCutlery are SpottedProblem Possible fault Solution Glasses have a Brown or blueDiscoloration film Cannot be wiped off Glasses are dull Discolored filmAfter sales service PC UpdateRepairs MieleCareTransport User Maintenance Instructions Cleaning and Care ExteriorWash cabinet Door and the door sealIndicator reflector Cleaning the triple filter Triple filter systemCleaning and Care Cleaning the spray arms Removing the spray armsCleaning the drain pump and non-return valve Page Installation Instructions Help to protect the environment Disposal of the packing materialDisposal of an old machine Electrical connection Grounding InstructionsHardwired electrical connection Grounding Instructions This Appliance Must be GroundedPlumbing Connection to the water supplyDrainage Venting the drainage systemPage Alteration rights reserved Nr 909 250 G5770/G5775