Miele G 5775, G 5770 manual Settings menu, Language

Page 42

Settings menu

The "Settings" menu allows you to change standard settings

Opening the "Settings" menu

Press the button to turn the dishwasher off.

Press and hold the "Program" button.

Turn the dishwasher on with the button and hold the "Program" button down for at least 4 seconds.

The first option of the Settings menu will appear in the display and all the indicator lights will come on.

See the "Display" section for details.

Select the menu option you wish to change.

The selected options are marked with a check .

Language

The display contents can be shown in different languages.

The displayed language can be changed in the Language .

Select the desired language and confirm with the center button.

The flag after the word Language serves as a guide when an unfamiliar language has been selected.

Select the menu option with a flag until the Language submenu is displayed.

42

Image 42

Contents Operating Instructions Dishwasher 5770 G Contents Contents Electrical Safety Correct usageInstallation Use Save These Instructions Disposal of an applianceGuide to the dishwasher Control panel Caring for the environment Energy saving washingBefore using for the first time To open the doorTo close the door Settings menu DisplayLanguage Water hardnessFilling the salt container Refill salt message Rinse aid Adding rinse aidRinse aid indicator Loading the dishwasher Items not recommended for dishwashing GlasswareSilver and aluminum Typical load for 10 place settings Typical load for 16 place settings Upper basket Foldable spikesHinged cup rack Jumbo cup rack Universal support barAdjusting the height Adjusting the upper basket Lower basket To replace the insert Removable MultiComfort insertTo remove the insert Glass rackFoldable spikes Cutlery Split cutlery trayCutlery basket Cutlery insert for the cutlery basketOptional accessories MieleCare CollectionUse DetergentAdding detergent Turning on Selecting a programStarting a program Program guide When to use Program sequence Program GuideTime display StandbyAt the end of a program Preparing your appliance for an extended vacationInterrupting a program Changing a programAdditional options Intensive lower basketTurbo Delay start Starting a program before the Delay start has elapsed Settings menu LanguageWater hardness Buzzer Buzzer in case of a faultBuzzer volume Buzzer at the end of a programDrying Plus Optimize standbyPre-rinse Deactivate indicatorsSoak Extended dryingContrast Factory defaultLeaving the Settings menu Filter checkFrequently Asked Questions Technical faultsFaults in the water intake/water drain Problem Possible fault Solution One of the followingGeneral problems with the dishwasher Sounds Poor cleaning results Cutlery are Problem Possible fault Solution Dishes are not dryGlasses SpottedDiscoloration film Cannot be wiped off Glasses are dull Problem Possible fault Solution Glasses have aBrown or blue Discolored filmRepairs After sales servicePC Update MieleCareTransport User Maintenance Instructions Wash cabinet Cleaning and CareExterior Door and the door sealIndicator reflector Cleaning the triple filter Triple filter systemCleaning and Care Cleaning the spray arms Removing the spray armsCleaning the drain pump and non-return valve Page Installation Instructions Help to protect the environment Disposal of the packing materialDisposal of an old machine Electrical connection Grounding InstructionsHardwired electrical connection Grounding Instructions This Appliance Must be GroundedPlumbing Connection to the water supplyDrainage Venting the drainage systemPage Alteration rights reserved Nr 909 250 G5770/G5775