Miele G 5775, G 5770 Buzzer at the end of a program, Buzzer in case of a fault, Buzzer volume

Page 44

Settings menu

Rinse aid

For best results the rinse aid dosage can be adjusted.

The dosage can be set between 0-6 ml. The factory default dosage setting is

3 ml rinse aid.

If spots appear on the dishes:

– Use a higher setting for rinse aid.

If smearing or streaking show:

– Use a lower setting for rinse aid.

Select the desired rinse aid amount and confirm with the center button.

Buzzer

When the buzzer is activated, a tone sounds at the end of a program and if a fault occurs.

Buzzer at the end of a program

The buzzer at the end of a program sounds four times in intervals with a brief break in between. The buzzer sounds if the dishwasher has not been turned off.

The buzzer at the end of a program is turned off by default.

Buzzer in case of a fault

In the event of a fault, the buzzer sounds continuously.

The fault buzzer cannot be turned off.

Buzzer volume

There are seven different volume settings. If no volume level is selected, the buzzer is deactivated.

Select the desired volume and confirm with the center button.

44

Image 44

Contents Operating Instructions Dishwasher 5770 G Contents Contents Electrical Safety Correct usageInstallation Use Save These Instructions Disposal of an applianceGuide to the dishwasher Control panel Caring for the environment Energy saving washingTo close the door Before using for the first timeTo open the door Settings menu DisplayLanguage Water hardnessFilling the salt container Refill salt message Rinse aid Adding rinse aidRinse aid indicator Loading the dishwasher Silver and aluminum Items not recommended for dishwashingGlassware Typical load for 10 place settings Typical load for 16 place settings Hinged cup rack Upper basketFoldable spikes Jumbo cup rack Universal support barAdjusting the height Adjusting the upper basket Lower basket Removable MultiComfort insert To remove the insertTo replace the insert Glass rackFoldable spikes Cutlery Split cutlery trayCutlery basket Cutlery insert for the cutlery basketOptional accessories MieleCare CollectionUse DetergentAdding detergent Starting a program Turning onSelecting a program Program guide When to use Program sequence Program GuideTime display StandbyAt the end of a program Preparing your appliance for an extended vacationInterrupting a program Changing a programTurbo Additional optionsIntensive lower basket Delay start Starting a program before the Delay start has elapsed Settings menu LanguageWater hardness Buzzer in case of a fault Buzzer volumeBuzzer Buzzer at the end of a programDrying Plus Optimize standbyDeactivate indicators SoakPre-rinse Extended dryingFactory default Leaving the Settings menuContrast Filter checkFrequently Asked Questions Technical faultsFaults in the water intake/water drain Problem Possible fault Solution One of the followingGeneral problems with the dishwasher Sounds Poor cleaning results Problem Possible fault Solution Dishes are not dry GlassesCutlery are SpottedProblem Possible fault Solution Glasses have a Brown or blueDiscoloration film Cannot be wiped off Glasses are dull Discolored filmAfter sales service PC UpdateRepairs MieleCareTransport User Maintenance Instructions Cleaning and Care ExteriorWash cabinet Door and the door sealIndicator reflector Cleaning the triple filter Triple filter systemCleaning and Care Cleaning the spray arms Removing the spray armsCleaning the drain pump and non-return valve Page Installation Instructions Disposal of an old machine Help to protect the environmentDisposal of the packing material Electrical connection Grounding InstructionsHardwired electrical connection Grounding Instructions This Appliance Must be GroundedPlumbing Connection to the water supplyDrainage Venting the drainage systemPage Alteration rights reserved Nr 909 250 G5770/G5775