Settings menu
Contrast
There are seven different display contrast settings.
Select the desired contrast and confirm with the center button.
Filter check
This selection allows you to set the number of cycles run before the filter check message shows.
You can select between 30 and 60 cycles.
The "Filter check" message is set by default to 50 cycles.
Select the desired interval and confirm with the center button.
Showroom program
Only for showrooms.
The dishwasher comes with various demo programs for dealers.
–Demo with wash sound:
The program activates the pumps to demonstrate the wash sound.
–Drying Plus Demo:
The door will open automatically.
Turning the demo mode on
Select the desired option.
Select the option On and confirm with the center button.
Close the door.
Demo mode will begin.
Turning the demo mode off
Demo mode will turn off automatically when it reaches the end of the cycle.
Factory default
If you have altered any settings from the factory default, you can reset them to the factory default settings.
Select Reset and confirm with the center button.
Leaving the Settings menu
Use Close to leave the Settings menu.
Select Close and confirm with the center button.
The display will then show the last program selected and the indicator light for the program selected will come on.
47