Miele G 5775, G 5770 manual Interrupting a program, Changing a program

Page 38

Use

Interrupting a program

A program is interrupted as soon as the door is opened.

If the door is closed again, the program will continue from where it was interrupted.

Water in the dishwasher is hot. Danger of scalding.

Only open the door if absolutely necessary and exercise extreme caution when doing so. Before closing the door again, leave it ajar for approx. 20 seconds. This will enable the temperature in the wash cabinet to settle. Close the door firmly until it clicks into place.

Changing a program

If the detergent flap is already open, do not change the program.

If a program has already started and you wish to change it:

Open the door.

Turn the dishwasher off with the button.

Turn the dishwasher on again with the button.

Select the desired program.

Start the program by closing the door.

The optical interface lights. The program starts.

38

Image 38

Contents Operating Instructions Dishwasher 5770 G Contents Contents Electrical Safety Correct usageInstallation Use Save These Instructions Disposal of an applianceGuide to the dishwasher Control panel Caring for the environment Energy saving washingTo close the door Before using for the first timeTo open the door Settings menu DisplayLanguage Water hardnessFilling the salt container Refill salt message Rinse aid Adding rinse aidRinse aid indicator Loading the dishwasher Silver and aluminum Items not recommended for dishwashingGlassware Typical load for 10 place settings Typical load for 16 place settings Hinged cup rack Upper basketFoldable spikes Jumbo cup rack Universal support barAdjusting the height Adjusting the upper basket Lower basket To replace the insert Removable MultiComfort insertTo remove the insert Glass rackFoldable spikes Cutlery Split cutlery trayCutlery basket Cutlery insert for the cutlery basketOptional accessories MieleCare CollectionUse DetergentAdding detergent Starting a program Turning onSelecting a program Program guide When to use Program sequence Program GuideTime display StandbyAt the end of a program Preparing your appliance for an extended vacationInterrupting a program Changing a programTurbo Additional optionsIntensive lower basket Delay start Starting a program before the Delay start has elapsed Settings menu LanguageWater hardness Buzzer Buzzer in case of a faultBuzzer volume Buzzer at the end of a programDrying Plus Optimize standbyPre-rinse Deactivate indicatorsSoak Extended dryingContrast Factory defaultLeaving the Settings menu Filter checkFrequently Asked Questions Technical faultsFaults in the water intake/water drain Problem Possible fault Solution One of the followingGeneral problems with the dishwasher Sounds Poor cleaning results Cutlery are Problem Possible fault Solution Dishes are not dryGlasses SpottedDiscoloration film Cannot be wiped off Glasses are dull Problem Possible fault Solution Glasses have aBrown or blue Discolored filmRepairs After sales servicePC Update MieleCareTransport User Maintenance Instructions Wash cabinet Cleaning and CareExterior Door and the door sealIndicator reflector Cleaning the triple filter Triple filter systemCleaning and Care Cleaning the spray arms Removing the spray armsCleaning the drain pump and non-return valve Page Installation Instructions Disposal of an old machine Help to protect the environmentDisposal of the packing material Electrical connection Grounding InstructionsHardwired electrical connection Grounding Instructions This Appliance Must be GroundedPlumbing Connection to the water supplyDrainage Venting the drainage systemPage Alteration rights reserved Nr 909 250 G5770/G5775