Use
Time display
Before the program starts, the time display shows the running time of the selected program in hours and minutes. During the running program the remaining time is shown in the time display.
Symbols will appear to indicate the current stage of the program:
Main wash
Interim rinse
Final rinse
Drying
Finished
The time displayed may vary with the same program. This can be due, among other factors, to the water temperature at each intake, the reactivation process, the type of detergent, the number of dishes and how soiled they are.
When a program is selected for the first time, the display shows an average time for a cold water intake.
Each time a program is run, the electronic unit adjusts the program running time according to the intake water temperature and the load size.
Standby
A few minutes after the last key is pressed or at the end of the program the dishwasher will switch into Standby mode to save energy. The display and the indicators are turned off and only the indicator light flashes slowly.
To turn the display back on press .
If you do not turn the dishwasher off after the program ends, it will turn completely off after a few minutes in standby mode (see "Settings - Optimize standby").
If refill salt and/or rinse aid or a fault are present in the display, the dishwasher will not switch to Standby mode.
The refill messages can be turned off when you use a tab detergent (see "Before using for the first time"). Fault messages cannot be turned off.
36