Miele G 5220, G 5225 operating instructions Cleaning the spray arms, Removing the spray arms

Page 57

Cleaning and Care

Cleaning the spray arms

Sometimes particles of food get stuck in the spray arm jets. The spray arms should be inspected and cleaned every 4 - 6 months.

￿Turn off the dishwasher before cleaning.

Removing the spray arms

￿Remove the cutlery tray (if present).

￿Push the upper spray arm up to engage the inner ratchet and unscrew the spray arm.

￿Lift up the middle spray arm, ￿, to engage the ratchet and unscrew the spray arm, ￿.

￿Remove the lower basket.

￿Pull the lower spray arm firmly upwards to remove.

￿Use a pointed object such as a toothpick to push food particles into the spray arm jets.

￿Rinse thoroughly under running water.

￿Return the spray arms and check that they rotate freely.

57

Image 57
Contents Before Operating Instructions Dishwasher 5220 GContents Important Safety InstructionsContents Correct usage Electrical SafetyInstallation Disposal of an appliance UseGuide to the dishwasher Control panel Energy saving washing Caring for the environmentDisposal of the packing material Disposal of an old machineBefore using for the first time To open the door Child safety lockTo close the door Water softener Programming the water softener Checking the programmed water hardness Filling the salt container Refill salt message Deactivate indicators Adding rinse aid Rinse aidRinse aid indicator Adjusting the dosage Loading the dishwasher Items not recommended for dishwashing GlasswareSilver and aluminum Typical load for 10 place settings with cutlery tray Typical load for 16 place settings with cutlery tray Typical load for 10 place settings with cutlery basket Typical load for 13 place settings with cutlery basket Upper basket Adjustable cup rackAdjusting the upper basket Lower basket Heavily soiled itemsDishwasher with cutlery tray Dishwasher with cutlery basket MultiComfort zone Cutlery tray Cutlery insert for the cutlery basket Cutlery basketMieleCare Collection Optional accessoriesDetergent UseAdding detergent Turning the dishwasher on Selecting a programStarting a program Program guide When to use Program sequence Standby Time displayProgram sequence indicator At the end of a programPreparing your appliance for an extended vacation Changing a program Interrupting a programTurbo Additional optionsDelay start Starting a program before Delay start has elapsed Delay start time shown in the time displayOptimize Standby Factory defaults Technical faults Frequently asked questionsFaults in the water intake or water drain General problems with the dishwasher Sounds Problem Possible fault Solution Dishes are not Poor cleaning resultsClean GlassesCutlery are Problem Possible fault Solution Dishes are not drySpotted White residue isBrown or blue Problem Possible fault Solution Glasses have aDiscoloration film Cannot be wiped off Glasses are dull Discolored filmPC Update After sales serviceRepairs MieleCareUser Maintenance Instructions Exterior Cleaning and CareWash cabinet Door and the door sealTriple filter system Cleaning and Care Removing the spray arms Cleaning the spray armsCleaning the drain pump and non-return valve Installation Instructions Grounding Instructions Electrical connectionGrounding Instructions This Appliance Must be Grounded Hardwired electrical connectionConnection to the water supply PlumbingVenting the drainage system DrainageInstallation requirements for measuring noise Noise measurementGeneral requirements for measuring noise Noise measurement Page Page Alteration rights reserved Nr 510 211 G5220/G5225
Related manuals
Manual 68 pages 22.98 Kb