Miele G 5225, G 5220 operating instructions Program sequence indicator, At the end of a program

Page 38

Use

Program sequence indicator

After a program has started, the program sequence indicator displays the respective program step.

At the end of a program

The program has ended when a 0 appears in the time display and "End" lights up in the program sequence display.

If the Express program was selected, the drying fan will run for a few minutes after the program has ended.

￿Open the door.

￿Press the ￿ button to turn the dishwasher off.

The dishwasher will continue to use electricity until it is turned off with the ￿ button.

￿If you would like to open the door at the end of the program, then make sure that you open the door fully. Otherwise steam from the dishwasher could damage the edge of the counter top because the fan is no longer running.

￿Unload the dishwasher.

Dishes tend to break and chip more easily when they are hot.

Allow the dishes to cool until they are comfortable enough to handle before unloading them.

The dishes will cool much faster if you open the door when the program has ended.

Unload the lower basket first, then the upper basket and then the cutlery tray (depending on the model).

This will prevent water from the upper basket and cutlery tray from dripping onto dishes in the lower basket.

Preparing your appliance for an extended vacation

If you elect to turn off the water to your home for an extended period of time, please note that this may not be enough to reduce the risk of a leak.

To be completely safe, you must turn off the water supply to each individual appliance. This means under the sink for a dishwasher, at the laundry bib for your washer, etc.

38

Image 38
Contents Operating Instructions Dishwasher 5220 G BeforeImportant Safety Instructions ContentsContents Electrical Safety Correct usageInstallation Use Disposal of an applianceGuide to the dishwasher Control panel Disposal of the packing material Caring for the environmentEnergy saving washing Disposal of an old machineTo close the door Before using for the first timeTo open the door Child safety lock Water softener Programming the water softener Checking the programmed water hardness Filling the salt container Refill salt message Deactivate indicators Rinse aid Adding rinse aidRinse aid indicator Adjusting the dosage Loading the dishwasher Silver and aluminum Items not recommended for dishwashingGlassware Typical load for 10 place settings with cutlery tray Typical load for 16 place settings with cutlery tray Typical load for 10 place settings with cutlery basket Typical load for 13 place settings with cutlery basket Adjustable cup rack Upper basketAdjusting the upper basket Dishwasher with cutlery tray Dishwasher with cutlery basket Lower basketHeavily soiled items MultiComfort zone Cutlery tray Cutlery basket Cutlery insert for the cutlery basketOptional accessories MieleCare CollectionUse DetergentAdding detergent Starting a program Turning the dishwasher onSelecting a program Program guide When to use Program sequence Time display StandbyPreparing your appliance for an extended vacation Program sequence indicatorAt the end of a program Interrupting a program Changing a programAdditional options TurboDelay start Delay start time shown in the time display Starting a program before Delay start has elapsedOptimize Standby Factory defaults Frequently asked questions Technical faultsFaults in the water intake or water drain General problems with the dishwasher Sounds Clean Poor cleaning resultsProblem Possible fault Solution Dishes are not GlassesSpotted Problem Possible fault Solution Dishes are not dryCutlery are White residue isDiscoloration film Cannot be wiped off Glasses are dull Problem Possible fault Solution Glasses have aBrown or blue Discolored filmRepairs After sales servicePC Update MieleCareUser Maintenance Instructions Wash cabinet Cleaning and CareExterior Door and the door sealTriple filter system Cleaning and Care Cleaning the spray arms Removing the spray armsCleaning the drain pump and non-return valve Installation Instructions Electrical connection Grounding InstructionsHardwired electrical connection Grounding Instructions This Appliance Must be GroundedPlumbing Connection to the water supplyDrainage Venting the drainage systemGeneral requirements for measuring noise Installation requirements for measuring noiseNoise measurement Noise measurement Page Page Alteration rights reserved Nr 510 211 G5220/G5225
Related manuals
Manual 68 pages 22.98 Kb