Miele G 5220, G 5225 operating instructions Frequently asked questions, Technical faults

Frequently asked questions

￿Repairs should only be carried out by a qualified and trained person in accordance with local and national safety regulations. Unauthorized repairs could cause personal injury or machine damage.

Technical faults

Problem	Possible fault	Solution
After turning on the	The dishwasher is not	Insert the plug.
dishwasher with the ￿	plugged in.
button, the Start/Stop	The circuit breaker has	Reset the circuit breaker.
indicator light does not
	tripped.	(See data plate for the
flash.
		correct fuse rating).
The dishwasher stops	The circuit breaker has	–	Reset the circuit
during a program.	tripped.		breaker (see data plate
			for the correct fuse
			rating).
		–	If the circuit breaker
			trips again, contact
			Miele.
The program sequence	There may be a technical	–	Press the ￿ button to
indicators Main wash,	fault.		turn the dishwasher off.
Drying and End all flash		After a few seconds:
simultaneously.		–	Turn the dishwasher
The time display shows
			on.
fault FXX.
		–	Use the Program
			button to select the
			desired program.
		–	Press the Start/Stop
			button.
		If the program sequence
		indicators flash again,
		there is a technical fault.?
		–	Contact Miele.
In addition, the drain	Fault F70:	– Close the water tap.
pump may run even	The waterproof system	–	Contact Miele.
when the door is open.	reports a fault.

45