Additional options
Optimize Standby
A few minutes after the last button is pressed or a few minutes after the end of the program the dishwasher will switch to Standby mode to save energy. The time display and the indicator lights are turned off and only the Start/Stop indicator light flashes slowly.
If the dishwasher is not turned off or opened after the program ends, after a few minutes in Standby mode it will turn off completely.
You can also deactivate the Optimize Standby function. The display and the indicator lights do not go out, and the dishwasher turns off 6 hours after the end of the program.
This results in higher energy consumption.
If Salt and/or Rinse aid or a fault is displayed, the dishwasher will not switch to Standby mode.
Press the button to turn the dishwasher off.
Press and hold the Start/Stop button and simultaneously turn the dishwasher on using the button. Keep the Start/Stop button pressed for at least four seconds until the "Start/Stop" indicator light comes on.
If it does not come on, start over.
Press the Delay start button eight times.
The Delay start indicator light shows 8 short flashes in intervals.
The flashing in the time display shows whether Optimizing Standby is turned on.
–"p 1": Optimize Standby is on.
–"p 0": Optimize Standby is off.
Press the Start/Stop button if you wish to change the setting.
The setting is immediately saved.
Press the button to turn the dishwasher off.
43