Miele CS1028 installation instructions Safety features, Ignition Safety Control

Page 15

Safety features

Ignition Safety Control

This gas combiset incorporates an Ignition Safety Control which stops the supply of gas if the flame goes out.

To reignite the burner, turn the control knob clockwise to “”, then turn on the burner as usual.

This safety feature is not operated by electricity, it will be active even if the appliance is in use during a power failure.

15

Image 15

Contents Operating and Installation Instructions Gas Combiset What to do if YOU Smell GAS Contents Children Correct usageTechnical safety Safety Important Safety Instructions Review Them Periodically Guide to the combiset Burner Cleaning the combiset Before using the combisetOperation Turning on and off / RegulatingTurning on Using the cooktop during a power failure Adjusting the flameTurning off Pans Pan sizeSuitable pans Ignition Safety Control Safety featuresCombiset Cleaning and careReassembling the burner Flame appears different than usual Possible fault Solution Frequently asked questionsFlame does not stay lit Possible fault Solution Igniter does not spark Possible fault SolutionTechnical Service MieleCare Installation Instructions Installation Safety distances above the appliance Safety distances to the sides of the appliance RecommendedNot recommended Not allowed Safety distance from the wall covering InstallationInstallation dimensions Cut out Installation of multiple appliances Cut-out CountertopInstallation Wood or solid surface countertops Attach the spring clips and support barsGranite countertop Removing the appliance Installing the appliance / appliancesSealing Tiled surfaces Electrical connection Power supplyWiring Diagram Gas connection Gas pressure regulator Nominal ratings Maximum output Gas type BTU/hrMinimum output Gas type BTU/hr Converting to another type of gas Help protect our environment Disposal of packing materialsDisposal of an old appliance Page