Miele CS1028 Attach the spring clips and support bars, Wood or solid surface countertops

Page 31

Installation

Attach the spring clips and support bars

Wood or solid surface countertops

Place the supplied spring clips and the support bars at the marked positions as shown above, by laying them on the upper edge of the cut-out and then securing them with the 1/8" x 1" (3.5 x 25 mm) screws (supplied).

31

Image 31

Contents Operating and Installation Instructions Gas Combiset What to do if YOU Smell GAS Contents Children Correct usageTechnical safety Safety Important Safety Instructions Review Them Periodically Guide to the combiset Burner Cleaning the combiset Before using the combisetTurning on and off / Regulating OperationTurning on Adjusting the flame Using the cooktop during a power failureTurning off Pan size PansSuitable pans Ignition Safety Control Safety featuresCombiset Cleaning and careReassembling the burner Flame appears different than usual Possible fault Solution Frequently asked questionsFlame does not stay lit Possible fault Solution Igniter does not spark Possible fault SolutionTechnical Service MieleCare Installation Instructions Installation Safety distances above the appliance Recommended Safety distances to the sides of the applianceNot recommended Not allowed Safety distance from the wall covering InstallationInstallation dimensions Cut out Installation of multiple appliances Cut-out CountertopInstallation Wood or solid surface countertops Attach the spring clips and support barsGranite countertop Removing the appliance Installing the appliance / appliancesSealing Tiled surfaces Electrical connection Power supplyWiring Diagram Gas connection Gas pressure regulator Maximum output Gas type BTU/hr Nominal ratingsMinimum output Gas type BTU/hr Converting to another type of gas Disposal of packing materials Help protect our environmentDisposal of an old appliance Page