Operation
Adjusting the flame
The burner can be variably adjusted between the lowest and highest flame by turning the control knob.
Since the outer portion of the flame is much hotter than the center, the flame should be set so that its tips do not spread beyond the sides of the pan. Flame tips which extend beyond the sides of the pan are hazardous.
Turning off
Turn the control clockwise to "".
This stops the flow of gas and the flame goes out.
Using the cooktop during a power failure
If there is an interruption to the electrical supply, the gas can be ignited using a match.
Press the control knob down and turn it counterclockwise to the ignition position.
While holding down the knob, light the gas at the burner with a match.
When the flame appears, keep the control knob pressed in for
8 - 10 seconds to allow the Ignition Safety Control to reach operating temperature.
13