Cleaning and care
Never use a steam cleaner to clean this combiset. Pressurized steam could cause permanent damage to the surface and to components for which the manufacturer cannot accept responsibility.
Do not use any sharp or pointed objects which could damage the seal between the frame and the countertop.
Never use scouring agents, pads, abrasive cleaning agents, or strong cleaners, e.g. oven sprays, stain or rust removers, these could damage the surface of the appliance.
Keep the ignitor in the burner dry. If it gets wet it will not spark.
Dry your combiset thoroughly after cleaning it to prevent lime deposits.
Spills containing salt or sugar should be cleaned immediately.
Combiset
Let the appliance cool to a safe temperature before removing the grates.
Clean the grates, combiset and knobs with a sponge and a mild solution of warm water and liquid dish soap. Do not wash parts in the dishwasher.
Soak baked or hardened spills. Dry the combiset and grates thoroughly after cleaning.
The stainless steel surfaces can be cleaned using a
To help prevent resoiling, a conditioner for stainless steel can also be used. Apply sparingly with even pressure. These cleaning products are available from Miele.
Do not use stainless steel cleaner on or around the printing, it may rub off. Use only a soft sponge with some dish liquid and warm water to clean this area.
16