1ERC SERIES
CONTROLS —
Control Guide
| — | Power switch; for turning the fryer on or off. (Power switch is located behind the door |
|
| panel.) |
| — | For setting fry temperature. For viewing shortening temperature and set temperature. |
| — | For entering and exiting the program mode. |
Through | — | For selecting program parameters. For setting timers 1 through 0. For entering |
|
| temperature and time values. |
| — | For toggling through the selections under program parameters. |
| — | For setting time on timers 1 through 5 in the program mode. |
| — | For setting time on timers 6 through 0 in the program mode. |
| — | For cleaning purposes when the fryer is filled with water. Temperature is maintained |
|
| at approximately 192°F (89°C). ** |
**NOTE: The boil button is used during cleaning for the boil out. Depressing this button will set the thermostat to a simmer point of 198°F. Note that there is a special feature in the controller that will sense water verses oil and automatically send the controller into the boil out mode when water is placed into the vat.
— 9 —