Vulcan-Hart ML-136496, ML-136499, ML-136498, ML-136497 Troubleshooting, Alarms and Error Messages

Page 19

6.Close the drain valve and refill the tank with water. Add 1 cup (0.2 L) of vinegar to neutralize alkaline left by the cleaner. Solution level must be between the MIN and MAX level on the fryer tank. Bring the solution to a simmer and allow it to stand for a few minutes.

7.Drain the tank and rinse thoroughly with clear, hot water. All traces of cleaner must be removed. Dry the tank thoroughly.

8.Close the drain valve and add shortening. Follow the FILLING FRY TANK WITH SHORTENING procedure in this manual. If using solid shortening, refer to MELT OPTIONS in this manual.

The fryer is now ready for use.

TROUBLESHOOTING

ALARMS AND ERROR MESSAGES

Open Probe - If an open probe is detected, the heat demand is disabled and any running cooking cycles are cancelled. All operator buttons are disabled. The control displays the following message:

1ERD Models -

Prob

1ERC Models -

OPEN PROBE

The alarm sounds continuously until the fault clears or the fryer is turned off, then back on. If the problem persists, call service.

Shorted Probe - If a shorted probe is detected, the heat demand is disabled and any running cooking cycles are cancelled. All operator buttons are disabled. The control displays the following message:

1ERD Models - Hi

1ERC Models - SHORTED PROBE

The alarm sounds continuously until the fault clears or the fryer is turned off, then back on. If the problem persists, call service.

Hi Temperature - If the temperature is greater than or equal to 415°F (212°C), the heat demand is disabled and any running cooking cycles are cancelled. All operator buttons are disabled. The control displays the following message:

1ERD Models - Hi

1ERC Models - SHORTED PROBE

The alarm sounds continuously until the fault clears or the fryer is turned off, then back on. Normal fryer operations resumes when temperature drops below 415°F (212°C). If the problem persists, call service.

Display Flashing "FILTER" - When the display flashes FILTER, the countdown timer has reached zero. Refer to the Filter Programming procedure in this manual to reset the timer.

1ERC Models - FILTER

— 19 —

Image 19
Contents Installation Width Fry Compound Model Inches / cm Voltage Lb / kg InstallationFIELD-INSTALLED Accessories UnpackingCanada AssemblyLocation United States of AmericaLeveling Casters AccessoryElectrical Connections Daily Shortening Addition OperationBefore First USE Filling FRY Tank with ShorteningControls 1ERD SeriesControl Guide Programming Guide ProgrammingExtended Shutdown Using the Fryer After StartupMelt Options 1ERD Series Shutdown1ERC Series Password No PasswordRequired 275F RecoveryDispose Set BackHeating Melt L Melt S Melt Options 1ERC SeriesFilter Programming Time Temperature and Time ProgrammingTemperature DisposeSetting Advanced Time Features Advanced Time FeaturesPress the power switch off Drain the fryer Unplug the fryer Time Programming Quick Chart Recommended maximum capacities Filtering ProcedureFrying Guidelines ALL Models FryingDaily CleaningDrain Interlock Shortening LifeAlarms and Error Messages TroubleshootingService and Parts Information Maintenance