1ERD SERIES
CONTROLS —
Control Guide
— Power switch; for turning the fryer on or off. (Power switch is located behind the door panel.)
—For cleaning purposes when the fryer is filled with water. Temperature is maintained at approximately 192°F (89°C).**
— For entering and exiting the program mode. For scrolling through program parameters.
—Starts and stops the timer; Silences the alarm after the timer times out; For entering temperature and time values in the program mode.
—Starts and stops the timer; Silences the alarm after the timer times out; For entering temperature and time values in the program mode.
— For viewing actual shortening temperature and set temperature.
**NOTE: The boil button is used during cleaning for the boil out. Depressing this button will set the thermostat to a simmer point of 198°F. Note that there is a special feature in the controller that will sense water verses oil and automatically send the controller into the boil out mode when water is placed into the vat.
— 6 —