NME454, 654 & FME504, 804
SENSOR MAINTENANCE
1.The bin control is a device that senses light, therefore it must be kept clean so it can “see”. At least twice a year, remove the bin control sensors from the base of the ice chute, and wipe the inside clean, as illustrated.
2.The ice machine senses water level by a probe located in the water reservoir. At least twice a year, the probe should be removed from the reservoir, and the tip wiped clean of mineral
ICE LEVEL SENSORS
SLIDE TO REMOVE
CLEAN THE
LIGHT SENSORS
Clean the Probe's Tip with ice machine cleaner and a clean, soft cloth.
January 2007
Page 18