Scotsman Ice NME454, NME654, FME804, FME504 Bearing Maintenance, Off, At least two times per year

Page 20

NME454, 654 & FME504, 804

BEARING MAINTENANCE

The bearing in the breaker should also be checked

￿unscrewing the auger stud

at least two times per year.

 

A. Check the bearing by:

 

￿removing the ice chute cover

 

 

 

 

 

Chute Cover

 

 

Auger Stud

Cap Screw

￿unscrewing the ice sweep

Ice Sweep

￿removing the water shed & unscrewing the breaker cover (left hand threads).

Breaker

Cover

Inspect the bearing. There should be plenty of grease in sight. If grease is needed the bearing and breaker should be removed to check the action of the bearing. It should rotate smoothly. To remove the breaker remove the lower ice chute then take out all four allen head cap screws and pull the breaker off the auger and evaporator.

If the bearing only needs grease, inject grease into the bearing using Scotsman grease needle pn 02-3559-01 and Scotsman bearing grease cartridge, pn A36808-001. Be sure to inject grease evenly and thoroughly.

See Removal and Replacement section to replace bearing or seals.

Bearing

Needle, pn

02-3559-01

 

Off

Reverse to reassemble.

January 2007

Page 20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents NME454, 654 & FME504 IntroductionFor the Installer Installation LimitationsNME654 Dispenser Applications Fuse Charge Ampacity Size 404ASample BIN and Machine Combinations Location Water LimitationsFor the Installer Location Airflow NoticeFor the Plumber Use only ¾ rigid tubingFor the Electrician Final Check List There are no Adjustments to MAKE, so replace the panels Initial Start UPLow Pressure Cut Out Switch Component DescriptionNME454, 654 & FME504 AutoSentry Control Board On/Off mode Switch Manual control forControl BOX Components Electrical Sequence Start UpShut Down Control Board Protection DevicesOperation Water Water Level The correct water level should beRefrigeration Schematic Operation RefrigerationOperation Performance Sanitizing Cleaning & SanitizingICE Making System In place cleaning Sensor Maintenance Hazardous Moving Parts AIR Cooled MaintenanceClean the air cooled condenser At least two times per year Bearing MaintenanceOff Auger Maintenance Service Diagnosis Symptom Possible Cause Probable CorrectionSymptom Possible Cause Probable Correction Control System Diagnostics Removal and Replacement Bin Controls BIN Controls Ice Level SensorsRemoval and Replacement Bearing And Breaker To Remove the Breaker Bearing AssemblyRemoval and Replacement Auger To Remove the AugerAuger is Stuck,To Replace the Water Seal Removal and Replacement Water SealTo Remove the Water Seal Resweating the adjacent tubing Removal and Replacement EvaporatorHeat sink the TXV body when unsweating or Removal and Replacement Gear Reducer and Motor Instructions for Liquid Charging R-404A Refrigeration System ServiceAccess Valves To use What to do Before Calling for Service If the machine is off, not making ice
Related manuals
Manual 16 pages 49.74 Kb

FME504, FME804, NME654, NME454 specifications

Scotsman Ice Systems is known for its high-quality ice machines, and models such as the NME454, NME654, FME804, and FME504 are no exceptions. Designed with both performance and efficiency in mind, these machines cater to various business needs, from restaurants to convenience stores.

The NME454 and NME654 units are renowned for their compact design, making them ideal for establishments with limited space. Despite their smaller size, these machines do not compromise on ice production capacity. The NME454 can produce up to 430 pounds of ice per day, while the NME654 boasts an impressive output of up to 600 pounds. Both models utilize Scotsman's signature innovative technology to ensure consistent ice quality, primarily in the form of nugget ice, which is favored for its ability to cool beverages quickly.

In contrast, the FME804 and FME504 are larger-capacity machines that cater to high-volume requirements. The FME804 can produce around 800 pounds of ice daily, making it suitable for busy restaurants or bars. The FME504, while slightly smaller, still offers impressive production capabilities of up to 500 pounds per day. These machines incorporate advanced features such as the AquaArmor protective layer, which inhibits bacterial growth, ensuring that the ice produced is not only abundant but also hygienic.

All four models utilize an innovative air-cooled design that enhances energy efficiency and reduces operational costs. The easy-to-use control panel allows for straightforward operation, and maintenance is streamlined thanks to easily accessible components. Additionally, the quiet operation of the machines ensures that they can be used in front-of-house areas without distracting customers.

In terms of construction, Scotsman ice machines are built to last with corrosion-resistant materials, ensuring longevity in demanding environments. With simple installation processes and compatibility with various environments, including indoor and outdoor settings, these units provide adaptability for any business scenario.

Overall, Scotsman’s NME454, NME654, FME804, and FME504 ice machines combine robust performance with innovative technology, catering efficiently to diverse ice production needs while maintaining high standards of hygiene and reliability.
Top Page Image Contents