Vulcan-Hart VSX7GC, VSX5GC, VSX10GC operation manual Leveling, Vent Hood, Plumbing Connections

Page 6

LEVELING

Using a spirit level or pan of water in the bottom of the steamer, adjust the leveling feet to level the steamer front to back and side to side.

For floor models (VSX5GC, VSX7GC or VSX10GC), mark hole locations on the floor through the anchoring holes provided in the rear flanged adjustable feet. Move steamer and drill holes in floor at marked locations. Insert proper anchoring devices. Set steamer back in proper position. Bolt and anchor leveled steamer securely to the floor. Seal bolts and flanged feet with Silastic or equivalent compound.

After the drain is connected, check for level by pouring water onto the floor of the compartment. All water should drain through the opening at the back of the compartment.

VENT HOOD

An exhaust system should be located directly above the steamer to vent steam and combustion gases generated by the steamer and gas boiler(s). Refer to NFPA Standard # 96 Vapor Removal from Cooking Equipment.

PLUMBING CONNECTIONS

WARNING: PLUMBING CONNECTIONS MUST COMPLY WITH APPLICABLE SANITARY, SAFETY AND PLUMBING CODES.

Water Supply Connection

The water filter, provided, must be installed in the water supply line going to the filtered water inlet; or your steamer warranty may be voided. For incoming water supply line pressures, refer to the water filter manual shipped with the water filter. Follow the recommendations contained in it. Water pressure to the steamer should be 20 to 60 psi.

Water Requirements

Proper water quality can improve the taste of the food prepared in the steamer, reduce liming in the steam generator and extend equipment life. Local water conditions vary from one location to another. Ask your municipal water supplier for details about your local water supply before installation.

Recommended water parameters are included in the water filter manual shipped with the steamer; follow the recommendations

contained in it.

Fig. 1

 

Presence of sediment, silica, excess chlorides or other dissolved solids may lead to a recommendation for alternate form(s) of water treatment. Be sure to test the water with the test strip and register the results using the registration card or by visiting vulcanhart.com.

– 6 –

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Models VSX 5G Important for Your Safety For Your SafetyTable of Contents Accommodation and Gas Rating InstallationGeneral UnpackingInstallation Codes and Standards LocationLegs Countertop Steamer-Model VSX5G only Leveling Vent HoodPlumbing Connections Draining Requirements Testing the GAS Supply PipingDrain Connections GAS ConnectionElectrical Connection Electrical DataTest Procedure Main Power Switch OperationControls Procedure for Complete or Prolonged Shutdown Startup ProcedureDaily Shutdown Procedure Stand bySteam Cooking PreparationCompartment Accommodation Cleaning Weekly More Often if Needed Deliming MaintenanceService and Parts Information Steam Unloader PortsTroubleshooting Symptom Possible Cause

VSX10GC, VSX7GC, VSX5G, VSX5GC specifications

The Vulcan-Hart line of products, including the VSX5GC, VSX5G, VSX7GC, and VSX10GC, represents a pinnacle in commercial cooking technology, ideal for restaurants, cafeterias, and various foodservice operations. Each model brings unique features and specifications tailored to meet diverse culinary requirements while ensuring efficiency and durability.

The VSX5GC stands out with its compact design, making it suitable for establishments with limited kitchen space. This gas-powered unit includes five burners, providing exceptional heat control for sautéing, boiling, and simmering. With a robust stainless steel construction, it promises longevity and easy maintenance. Its efficiency is further amplified by the inclusion of cast iron grates, which offer excellent heat retention and distribution. This model represents an excellent choice for small to mid-sized operations seeking reliability without sacrificing performance.

The VSX5G is a versatile counterpart to the VSX5GC, featuring identical burner configurations and construction quality. However, it boasts a slightly enhanced design that prioritizes ease of use. The VSX5G incorporates ergonomic knobs and intuitive controls, allowing chefs to adjust temperatures seamlessly under pressure. This unit is suited for both business establishments and high-demand kitchens that require swift transitions without compromising food quality.

Moving to the VSX7GC, this more powerful model features seven burners, catering to larger foodservice operations. The additional burner capacity enhances cooking versatility, allowing chefs to prepare multiple dishes simultaneously. It retains the rugged stainless steel finish and cast iron grates. An additional benefit of the VSX7GC is its upgraded ignition system, which facilitates quicker and more reliable starts—an essential feature during peak service times.

Lastly, the VSX10GC is the flagship model, designed for high-volume kitchens that demand maximum efficiency and output. With ten burners, this heavy-duty unit can handle various cooking techniques at once. Its robust construction, integrated with advanced gas control technology, ensures precise temperature management—a critical aspect in creating consistent culinary masterpieces. Furthermore, the VSX10GC showcases a wider cooking surface, allowing for larger pots and pans, thus expediting meal preparation.

Overall, the Vulcan-Hart lineup—comprising the VSX5GC, VSX5G, VSX7GC, and VSX10GC—offers unmatched performance, durability, and flexibility. Each model is engineered to accommodate different scales of operations, ensuring that every commercial kitchen can find the right fit for its culinary needs. With advanced technology and robust construction at their core, Vulcan-Hart cooking equipment stands as a trusted choice among industry professionals, fostering a foundation for culinary excellence.
Top Page Image Contents