FULL SIZE ELECTRIC CONVECTION OVEN - REMOVAL AND REPLACEMENT OF PARTS
Left Side Panel
1.Remove the screws which secure the left side of the top front cover, bottom front cover and control panel.
2.Remove the seven screws securing the left side panel.
3.Pull the left side panel out at the bottom then down to remove.
4.Reverse the procedure to install.
CONTROL PANEL
COMPONENTS
WARNING: DISCONNECT THE ELECTRICAL
POWER TO THE MACHINE AT THE MAIN
CIRCUIT BOX. PLACE A TAG ON THE CIRCUIT
BOX INDICATING THE CIRCUIT IS BEING
SERVICED.
Removable Components
1.Remove the control panel as outlined under
"COVERS AND PANELS".
2.Remove the component being replaced.
3.Reverse the procedure to install the replacement component, then check oven for proper operation.
Page 7 of 60 |
| F25105 (December 2001) |
|