Internal temperature is the best test of doneness
for manv foods.
.
Use Temp Coo~old to cook a variety of foods to the desired finished food temperature. The Mcro Cook setting is recommended for batters, doughs, frozen foods and foods which are difficult to cook precisely with the probe.
Temp Coowold takes the guesswork out of cooking, because the oven automatically switches to “Hold” setting after reaching the preset food temperature and maintains that temperature until you touch the CLEWOFF pad.
NOTE: Oven automaticrdly switches to “HoId” when preset food temperature is reached.
The Temperature Probe
The temperature probe is a food thermometer that gauges the intemd temperature of your food. (Its appearance may vary from picture shown.) The probe must be used when using Temp Coo~old or Auto Roast. To use the probe properly, follow directions in the Automatic Roasting section.
How to Temp Cook a Rolled Beef Rib Roast to Medium
Step 1: Insert temperature probe and attach probe securely in oven wall. Close the door.
Sten 2: Touch TEMP COO~OLD Dad.
1
Ste~ 3: Touch 1,6 and O for 160°F.
nPOWER Step 4: Touch PO~R LE~L pad. EVEL Touch 5 for medium power. -
Step 5: Touch the ST~T pad. If internal SA~ temperature of the roast is less than 90°F.,
o display will show “COOL”; if temperature is 90°F. or above, display shows temperature counting up.
Cooking Tips
●Use a lower power level; foods will heat more evedy though requiring more time.
●Be sure frozen food has been completely defrosted before inserting probe. Probe may break off if used in frozen foods.
Step 6: men 160°F. is reache~ the oven will sound and display “Hold.” The oven will then hold the temperature.
Step 7: Touch the CLEMOFF pad to stop U* the cycle.
n
Step 8: Remove probe and food from the oven.
●Cover foods loosely for moisture control and quick even heating.
●Insert the probe horizontally into the center meaty area not touching bone or fat. Make sure the hande does not touch the food or top or sides of the oven.
Questions and hswers
Q. Why did “PRObE” flash on the display?
,— A. “PRObE” will flash if you don’t seat the cable end of the probe securely into the receptacle in the oven wall or if you touch the ~MP COO~OLD pad and forget to use the probe.
Q. Can I leave my probe in the oven if it’s not inserted in food?
A. No, if it touches the oven wall, it may damage the oven.
19