=- Questions? ~~ Use This Problem Solver

—=— Questions?

~“~ Use This Problem Solver

PROBLEM

OVEN WILL NOT COME ON

CONTROL PANEL LIGHTED, YET OVEN WILL NOT START

FOODS ARE EITHER OVERCOOKED OR UNDERCOOKED

POSSIBLE CAUSE

●A fuse in your home may be blown or the circuit breaker tripped. Replace fuse or reset circuit breaker.

●Unplug your microwave oven, then plug it back in.

●Make sure 3-prong plug on oven is fully inserted into wall receptacle.

●Door not securely closed.

●START pad must be touched after entering cooking selection.

●Another selection entered already in oven and CLEAWOFF pad not touched to cancel it.

●Make sure you have entered cooking time after touching TIME COOK I & 11 pad.

“CLEAWOFF pad was touched accidentally. Reset cooking program and touch START pad.

●Make sure you entered a code number after touching TEMP COOWHOLD pad.

●Cooking times may vary because of starting food temperature, food density or amount of foods in oven. Touch TIME COOK I & 11 pad and additional cooking time for completion.

●Incorrect power level entered. Check Cooking Guide for recommended power level.

●Dish was not rotated, turned or stirred. Some dishes require specific instructions. Check Cooking Guide or recipe for instructions.

●Too many dishes in oven at same time. Cooking time must be increased when cooking more than one food item. Check Cooking Guide time recommendations.

All these things are normal with your microwave oven:

●Steam or vapor escaping from around the door.

s Light reflection around door or outer case.

●Dimming oven I ight and change in blower sound may occur while operating at power levels other than high.

●Dull thumping sound while oven is operating.

●Some TV-Radio interference might be noticed while using your microwave oven. It’s similar to the interference caused by other small appliances and does not indicate a problem with your oven.

If you need more help... call, toll free: GE Answer Center(’)/ 800.626.2000/ consumer information service