GE JTP95 Special features of your lower oven control, Consumer Support Troubleshooting Tips

Page 24

Safety Instructions

Special features of your lower oven control.

Your new touch pad control has additional features that you may choose to use. The following are the features and how you may activate them.

The special feature modes can only be activated while the display is showing the time of day. They remain in the control’s memory until the steps are repeated.

When the display shows your choice, press the START pad. The special features will remain in memory after a power failure.

Operating Instructions

12 Hour Shut-Off

With this feature, should you forget and leave the oven on, the control will automatically turn off the oven after 12 hours during baking functions or after 3 hours during a broil function.

If you wish to turn OFF this feature, follow the steps below.

Press the BAKE and BROIL HI/LO pads at the same time for 3 seconds until the display shows SF.

Press the DELAY START pad until no shdn (no shut-off) appears in the display.

Press the START pad to activate the no shut-off and leave the control set in this special features mode.

Fahrenheit or Centigrade Temperature Selection

Care and Cleaning

Your oven control is set to use the Fahrenheit temperature selections but you may change this to use the Centigrade selections.

Press the BAKE and BROIL HI/LO pads at the same time for 3 seconds until the display shows SF.

Press the BROIL HI/LO pad. The display will show F (Fahrenheit).

Press the BROIL HI/LO pad again. The display will show C (Centigrade).

Press the START pad.

Consumer Support Troubleshooting Tips

Control Lockout

Your control will allow you to lock down the touch pads so they cannot be activated when pressed.

Press the BAKE and BROIL HI/LO pads at the same time for 3 seconds until the display shows SF.

Press the SELF CLEAN pad. The display will show LOC OFF.

Press the SELF CLEAN pad again. The display will show LOC ON.

Press the START pad to activate the control lockout feature and leave the control set in this special features mode.

To unlock the control, repeat steps 1 and 2. Press the START pad when the display shows LOC OFF.

When this feature is on and the touch pads are pressed the display will show LOC.

NOTE: The control lockout mode will not affect the CLOCK, KITCHEN TIMER ON/OFF and OVEN LIGHT touch pads.

24

Image 24
Contents Cooking Center Write the model and serial numbers here Model # Serial #Important Safety Notice Cleaning Operating InstructionsConsumer Support Troubleshooting Tips Care Safety Precautions Safety InstructionsTips Care and Cleaning Operating Instructions Cook Meat and Poultry THOROUGHLY…Microwave Oven To reduce the risk of fire in the oven cavityMICROWAVE-SAFE Cookware Follow these guidelinesSafety Instructions Operating Instructions Care and Cleaning Troubleshooting Tips Consumer SupportArcing Super Heated WaterALL These Things are Normal with Your Microwave SELF-CLEANING Lower Oven SupportUsing the microwave oven controls Cleaning Operating Instructions Safety InstructionsConsumer Support Troubleshooting Tips Care Cleaning Troubleshooting Tips Consumer Support CareDoes not turn on microwave energy Changing the microwave power level To change the power level…Here are some examples of uses for various power levels InstructionsUsing the timed microwave features Consumer SupportTime Cook Express CookVegetable Amount Time Comments AsparagusSafety Time DefrostDefrosting Guide Food Time CommentsUsing the microwave sensor cooking features Sensor CookingPopcorn Safety Instructions How to Change the Automatic SettingsBeverage ReheatPotato Chicken/FishChicken or 4-16 ounces of fish Using the microwave auto feature Defrost Auto/TimePress START/PAUSE Conversion GuideUsing the other microwave features Tips CareTroubleshooting Tips Microwave terms Term DefinitionUsing the lower oven controls Care and Cleaning Troubleshooting TipsSpecial features of your lower oven control Consumer Support Troubleshooting TipsFahrenheit or Centigrade Temperature Selection Hour Shut-OffTones at the End of a Timed Cycle Hour, 24 Hour or Clock Black-OutYour control is set to use a 12 hour clock Using Convection Conversion Cook and HoldUsing the lower oven Care and CleaningHow to Set the Oven for Broiling Broiling GuideHI Broil Using the lower oven clock and timer Tips Consumer SupportUsing the lower oven timed baking and roasting features How to Set an Immediate Start and Automatic StopHow to Set a Delayed Start and Automatic Stop Using the lower oven probe Troubleshooting Tips Consumer SupportHow to Set the Oven For Roasting When Using the Probe Using the lower convection oven Tips Care and CleaningConvection Bake Convection RoastHow to Set the Oven for Convection Baking or Roasting Safety Cookware for Convection CookingPaper and Plastic Metal and GlassConvection Roasting Guide Press the Convection Roast padUsing the lower oven timed features For convection baking Press the Convection Bake padAdjust the lower oven thermostat-Do it yourself To Adjust the ThermostatType of margarine will affect baking performance Using the self-cleaning lower oven Before a Clean CycleOperating Instructions Safety Consumer Support Troubleshooting Tips Care and CleaningAfter a Clean Cycle How to Delay the Start of CleaningCare and cleaning of the cooking center How to Remove Packaging TapeMicrowave Oven Instructions Safety To clean the inside of the doorTo clean the outside of the door Lift-Off Oven DoorInstructions Operating Broiler Pan & Grid lower ovenControl Panel Instructions CareLower Oven Light Bulb To removeTo replace Before You Call For Service… Problem Possible Causes What To DoSignals after entering Delay startLower oven control Cooking time orTemperature too Self-cleanClean cycle Not open after a Clean cyclePower outage Vent when usingLetter flash Lower oven displayPage Consumer Support Troubleshooting Tips Care and Cleaning Operating InstructionsWe’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration GE Built-In Microwave Cooking Center Warranty GE Will ReplaceWhat GE Will Not Cover Warrantor General Electric Company. Louisville, KYSchedule Service Parts and AccessoriesConsumer Support GE Appliances Website Real Life Design Studio

JTP95 specifications

The GE JTP95 is a notable entry in General Electric's line of high-performance jet engines, designed primarily for commercial aviation applications. Known for its advanced technological features, the JTP95 integrates innovative design elements that enhance efficiency, performance, and reliability while minimizing environmental impact.

At the heart of the JTP95 engine is its turbofan configuration, which combines superior thrust capabilities with reduced noise levels. This design not only provides the necessary power for larger aircraft but also adheres to increasingly stringent noise regulations, making it a favorite among carriers operating in noise-sensitive areas.

One of the standout features of the GE JTP95 is its advanced materials technology. The engine incorporates lightweight composite materials and high-strength alloys, which contribute to fuel efficiency while ensuring durability under stress. These materials allow for higher operating temperatures, leading to improved thermal efficiency and overall performance.

The engine utilizes an innovative full authority digital engine control (FADEC) system, which optimizes fuel consumption and engine performance in real-time. This system ensures that the engine operates at peak efficiency throughout various flight conditions, providing pilots with valuable performance data and enhancing safety measures.

Moreover, the JTP95 is designed with a bypass ratio that significantly reduces emissions when compared to older engine models. The high bypass ratio means that a larger proportion of air is directed around the engine core, which not only improves fuel efficiency but also results in lower carbon emissions, aligning with the industry's shift towards more sustainable aviation solutions.

Maintenance is another area where the GE JTP95 excels. The engine features modular design components, allowing for easier access to critical parts during servicing. This reduces downtime and associated costs for airlines, while also enhancing the overall reliability of the engine over its lifespan.

In summary, the GE JTP95 stands out in the aviation sector for its combination of innovative technologies, advanced materials, and efficient design. It exemplifies GE's commitment to developing engines that meet modern demands for performance, reliability, and environmental stewardship, making it a key player in the future of commercial aviation. Organizations looking for a high-performance and environmentally friendly solution for their fleet will find the JTP95 to be an ideal choice.