GE JTP95 owner manual SELF-CLEANING Lower Oven, Support

Page 9

www.GEAppliances.com

WARNING!

SELF-CLEANING LOWER OVEN

Do not use aluminum foil to line oven bottoms, except as suggested in this manual. Improper installation of aluminum foil may result in a risk of electric shock or fire.

Safety Instructions

■Stand away from the oven when opening the oven door. Hot air or steam which escapes can cause burns to hands, face and/or eyes.

■Do not heat unopened food containers. Pressure could build up and the container could burst, causing an injury.

■Keep the oven vent unobstructed.

■Keep the oven free from grease buildup.

■Keep the cooking center clean and free of accumulations of grease or spillovers, which may ignite.

■Never leave the oven door open when you are not watching the cooking center.

■Place the oven shelf in the desired position while the oven is cool. If shelves must be handled when hot, do not let pot holder contact the heating elements.

■When using cooking or roasting bags

in the oven, follow the manufacturer’s directions.

■Pulling out the shelf to the stop-lock is a convenience in lifting heavy foods. It is also a precaution against burns from touching hot surfaces of the door or oven walls.

■Do not use the oven for a storage area. Items stored in an oven can ignite.

■Do not leave paper products, cooking utensils or food in the oven when not in use.

■After broiling, always take the broiler pan out of the oven and clean it. Leftover

grease in the broiler pan can catch fire next time you use the oven.

■Do not use the oven to dry newspapers. If overheated, they can catch on fire.

■Never leave jars or cans of fat drippings in or near your oven.

■Clean only parts listed in this Owner’s Manual.

■Do not clean the door gasket. The door gasket is essential for a good seal. Care should be taken not to rub, damage or move the gasket.

■Do not use oven cleaners. No commercial oven cleaner or oven liner protective coating of any kind should be used in or around any part of the oven. Residue from oven cleaners will damage the inside of the oven when the self-clean cycle is used.

■Before self-cleaning the oven, remove the probe, broiler pan, grid and other cookware.

■Be sure to wipe up excess spillage before starting a self-cleaning cycle.

■If the self-cleaning mode malfunctions, turn the oven off and disconnect the power supply. Have it serviced by a qualified technician.

■Listen for a fan— a fan noise should be heard sometime during the cleaning cycle. If not, call for service before self-cleaning again.

Operating Instructions Care and Cleaning Troubleshooting Tips Consumer

READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY.

SAVE THESE INSTRUCTIONS

9

Support

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Write the model and serial numbers here Model # Serial # Cooking CenterImportant Safety Notice Cleaning Operating InstructionsConsumer Support Troubleshooting Tips Care Safety Instructions Safety PrecautionsCook Meat and Poultry THOROUGHLY… Tips Care and Cleaning Operating InstructionsTo reduce the risk of fire in the oven cavity Microwave OvenFollow these guidelines MICROWAVE-SAFE CookwareCare and Cleaning Troubleshooting Tips Consumer Support Safety Instructions Operating InstructionsArcing Super Heated WaterALL These Things are Normal with Your Microwave Support SELF-CLEANING Lower OvenUsing the microwave oven controls Cleaning Operating Instructions Safety InstructionsConsumer Support Troubleshooting Tips Care Cleaning Troubleshooting Tips Consumer Support CareDoes not turn on microwave energy To change the power level… Changing the microwave power levelHere are some examples of uses for various power levels InstructionsConsumer Support Using the timed microwave featuresTime Cook Express CookAsparagus Vegetable Amount Time CommentsTime Defrost SafetyDefrosting Guide Food Time CommentsUsing the microwave sensor cooking features Sensor CookingPopcorn How to Change the Automatic Settings Safety InstructionsBeverage ReheatPotato Chicken/FishChicken or 4-16 ounces of fish Defrost Auto/Time Using the microwave auto featurePress START/PAUSE Conversion GuideTips Care Using the other microwave featuresTroubleshooting Tips Term Definition Microwave termsCare and Cleaning Troubleshooting Tips Using the lower oven controlsConsumer Support Troubleshooting Tips Special features of your lower oven controlFahrenheit or Centigrade Temperature Selection Hour Shut-OffTones at the End of a Timed Cycle Hour, 24 Hour or Clock Black-OutYour control is set to use a 12 hour clock Cook and Hold Using Convection ConversionCare and Cleaning Using the lower ovenHow to Set the Oven for Broiling Broiling GuideHI Broil Tips Consumer Support Using the lower oven clock and timerUsing the lower oven timed baking and roasting features How to Set an Immediate Start and Automatic StopHow to Set a Delayed Start and Automatic Stop Using the lower oven probe Troubleshooting Tips Consumer SupportHow to Set the Oven For Roasting When Using the Probe Tips Care and Cleaning Using the lower convection ovenConvection Bake Convection RoastSafety Cookware for Convection Cooking How to Set the Oven for Convection Baking or RoastingPaper and Plastic Metal and GlassPress the Convection Roast pad Convection Roasting GuidePress the Convection Bake pad Using the lower oven timed features For convection bakingAdjust the lower oven thermostat-Do it yourself To Adjust the ThermostatType of margarine will affect baking performance Before a Clean Cycle Using the self-cleaning lower ovenConsumer Support Troubleshooting Tips Care and Cleaning Operating Instructions SafetyAfter a Clean Cycle How to Delay the Start of CleaningCare and cleaning of the cooking center How to Remove Packaging TapeMicrowave Oven To clean the inside of the door Instructions SafetyTo clean the outside of the door Lift-Off Oven DoorBroiler Pan & Grid lower oven Instructions OperatingControl Panel Instructions CareLower Oven Light Bulb To removeTo replace Problem Possible Causes What To Do Before You Call For Service…Delay start Signals after enteringLower oven control Cooking time orSelf-clean Temperature tooClean cycle Not open after a Clean cycleVent when using Power outageLetter flash Lower oven displayPage Operating Instructions Consumer Support Troubleshooting Tips Care and CleaningWe’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration GE Will Replace GE Built-In Microwave Cooking Center WarrantyWhat GE Will Not Cover Warrantor General Electric Company. Louisville, KYParts and Accessories Schedule ServiceConsumer Support GE Appliances Website Real Life Design Studio

JTP95 specifications

The GE JTP95 is a notable entry in General Electric's line of high-performance jet engines, designed primarily for commercial aviation applications. Known for its advanced technological features, the JTP95 integrates innovative design elements that enhance efficiency, performance, and reliability while minimizing environmental impact.

At the heart of the JTP95 engine is its turbofan configuration, which combines superior thrust capabilities with reduced noise levels. This design not only provides the necessary power for larger aircraft but also adheres to increasingly stringent noise regulations, making it a favorite among carriers operating in noise-sensitive areas.

One of the standout features of the GE JTP95 is its advanced materials technology. The engine incorporates lightweight composite materials and high-strength alloys, which contribute to fuel efficiency while ensuring durability under stress. These materials allow for higher operating temperatures, leading to improved thermal efficiency and overall performance.

The engine utilizes an innovative full authority digital engine control (FADEC) system, which optimizes fuel consumption and engine performance in real-time. This system ensures that the engine operates at peak efficiency throughout various flight conditions, providing pilots with valuable performance data and enhancing safety measures.

Moreover, the JTP95 is designed with a bypass ratio that significantly reduces emissions when compared to older engine models. The high bypass ratio means that a larger proportion of air is directed around the engine core, which not only improves fuel efficiency but also results in lower carbon emissions, aligning with the industry's shift towards more sustainable aviation solutions.

Maintenance is another area where the GE JTP95 excels. The engine features modular design components, allowing for easier access to critical parts during servicing. This reduces downtime and associated costs for airlines, while also enhancing the overall reliability of the engine over its lifespan.

In summary, the GE JTP95 stands out in the aviation sector for its combination of innovative technologies, advanced materials, and efficient design. It exemplifies GE's commitment to developing engines that meet modern demands for performance, reliability, and environmental stewardship, making it a key player in the future of commercial aviation. Organizations looking for a high-performance and environmentally friendly solution for their fleet will find the JTP95 to be an ideal choice.
Top Page Image Contents