Changing the microwave power level, Instructions

Instructions

Changing the microwave power level.

The power level may be entered or changed immediately after entering the time for Time Cook, Time Defrost or Express Cook. The power level may also be changed during time countdown.

Operating Instructions Safety

To change the power level…

Press the TIME COOK pad.

Enter cooking time.

Press the POWER LEVEL pad.

Select desired power level 1–10.

Press the START/PAUSE pad.

Variable power levels add flexibility to microwave cooking. The power levels on the microwave oven can be compared to the surface units on a range. Each power level gives you microwave energy a certain percent of the time.

■Power level 7 is microwave energy 70% of the time.

■Power level 3 is energy 30% of the time.

Here are some examples of uses for various power levels:

■High 10: Fish, bacon, vegetables, boiling liquids.

■Med-High 7: Gentle cooking of meat and poultry; baking casseroles and reheating.

■Medium 5: Slow cooking and tenderizing for stews and less tender cuts of meat.

■Low 2 or 3: Defrosting; simmering; delicate sauces.

■Warm 1: Keeping food warm; softening butter.

Consumer Support Troubleshooting Tips Care and Cleaning

■Most cooking will be done on High (power level 10) which gives you 100% power. Power level 10 will cook faster but food may need more frequent stirring, rotating or turning over.

A lower setting will cook more evenly and need less stirring or rotating of the food. Some foods may have better flavor, texture or appearance if one of the lower settings is used. Use a lower power level when cooking foods that have a tendency to boil over, such as scalloped potatoes.

Rest periods (when the microwave energy cycles off) give time for the food to “equalize” or transfer heat to the inside of the food. An example of this is shown with power level 3—the defrost cycle.

If microwave energy did not cycle off, the outside of the food would cook before the inside was defrosted.

JT965 specifications

The GE JT965 is a high-performance gas turbine engine notable for its efficiency, reliability, and cutting-edge technology in power generation and industrial applications. Leveraging innovative design and advanced materials, the JT965 provides an optimal solution for users seeking effective energy solutions.

One of the main features of the JT965 is its impressive thermal efficiency, which can exceed 40%, making it one of the leaders in its class. This high efficiency translates directly into lower operational costs and reduced emissions, contributing to a more sustainable power generation landscape. Operators can rely on the JT965 to deliver robust performance while adhering to environmental regulations.

The JT965 incorporates state-of-the-art aerodynamics, which enhances the overall performance of the turbine. The advanced compressor design, with its multi-stage high-bypass ratios, ensures a consistent airflow, resulting in improved combustion efficiency and power output. Additionally, the turbine blades are crafted from advanced nickel-based superalloys, which are capable of maintaining strength and integrity even at high temperatures.

Another standout characteristic of the JT965 is its modular design. Components can be easily replaced or upgraded, reducing maintenance downtime and simplifying service protocols. This modularity allows operators to keep the engine running efficiently over its lifecycle. Moreover, the JT965 is designed with advanced monitoring systems that provide real-time data on performance metrics, enabling predictive maintenance and further enhancing reliability.

The turbine's operational flexibility is also a significant advantage. It can run on a variety of fuels, including natural gas and liquid fuels, making it adaptable to various energy markets around the globe. This versatility allows operators to optimize fuel use based on availability and cost, contributing to overall economic efficiency.

In summary, the GE JT965 gas turbine engine epitomizes modern engineering excellence, with its high thermal efficiency, advanced materials, and innovative design features. Its adaptability to different fuel types and ease of maintenance make it a compelling choice for power generation and industrial users, setting a benchmark for future developments in the field of gas turbine technology.