Safety Instructions Operating Instructions Care

www.GEAppliances.com

Slot

Hinge lock

Pull hinge locks down to unlock

Removal position

Lift-Off Oven Door

The door is very heavy. Be careful when removing and lifting the door.

Do not lift the door by the handle.

To remove the door:

Fully open the door.

Pull the hinge locks down toward the door frame, to the unlocked position. A tool, such as a small flat- blade screwdriver, may be required.

Firmly grasp both sides of the door at the top.

Close door to the door removal position, which is halfway between the broil stop position and fully closed.

Lift door up and out until the hinge arm is clear of the slot.

To replace the door:

Firmly grasp both sides of the door at the top.

With the	Bottom	Hinge arm
door at the	Bottom	Hinge arm
door at the	edge
same angle as	of slot
the removal
position, seat the
indentation of
the hinge arm		Indentation
into the bottom		Indentation
into the bottom
edge of the hinge slot. The notch in
the hinge arm must be fully seated
into the bottom of the slot.

Fully open the door. If the door will not fully open, the indentation is not seated correctly in the bottom edge of the slot.

Push the hinge locks up against the front frame of the oven cavity, to the locked position.

Hinge arm

Hinge lock

Push hinge locks up to lock

Safety Instructions Operating Instructions Care and

Close the oven door.

Cleaning

The gasket is designed with a gap at the bottom to allow for proper air circulation.

Do not rub or clean the door gasket— it has an extremely low resistance to abrasion.

If you notice the gasket becoming worn, frayed or damaged in any way or if it has become displaced on the door, you should have it replaced.

To clean the inside of the door:

■Because the area inside the gasket is cleaned during the self-clean cycle, you do not need to clean this by hand.

■The area outside the gasket and the door liner can be cleaned with a soap-filled steel wool or plastic pad, hot water and detergent. Rinse well with a vinegar and water solution.

To clean the outside of the door:

■Use soap and water to thoroughly clean the top, sides and front of the oven door. Rinse well. You may also use a glass cleaner to clean the glass on the outside of the door. Do not let water drip into the vent openings.

■If any stain on the door vent trim is persistent, use a soft abrasive cleaner and a sponge-scrubber for best results.

■Spillage of marinades, fruit juices, tomato sauces and basting materials containing acids may cause discoloration and should be wiped up immediately. When surface is cool, clean and rinse.

■Do not use oven cleaners, cleaning powders or harsh abrasives on the outside of the door.

Troubleshooting Tips Consumer Support

JT965 specifications

The GE JT965 is a high-performance gas turbine engine notable for its efficiency, reliability, and cutting-edge technology in power generation and industrial applications. Leveraging innovative design and advanced materials, the JT965 provides an optimal solution for users seeking effective energy solutions.

One of the main features of the JT965 is its impressive thermal efficiency, which can exceed 40%, making it one of the leaders in its class. This high efficiency translates directly into lower operational costs and reduced emissions, contributing to a more sustainable power generation landscape. Operators can rely on the JT965 to deliver robust performance while adhering to environmental regulations.

The JT965 incorporates state-of-the-art aerodynamics, which enhances the overall performance of the turbine. The advanced compressor design, with its multi-stage high-bypass ratios, ensures a consistent airflow, resulting in improved combustion efficiency and power output. Additionally, the turbine blades are crafted from advanced nickel-based superalloys, which are capable of maintaining strength and integrity even at high temperatures.

Another standout characteristic of the JT965 is its modular design. Components can be easily replaced or upgraded, reducing maintenance downtime and simplifying service protocols. This modularity allows operators to keep the engine running efficiently over its lifecycle. Moreover, the JT965 is designed with advanced monitoring systems that provide real-time data on performance metrics, enabling predictive maintenance and further enhancing reliability.

The turbine's operational flexibility is also a significant advantage. It can run on a variety of fuels, including natural gas and liquid fuels, making it adaptable to various energy markets around the globe. This versatility allows operators to optimize fuel use based on availability and cost, contributing to overall economic efficiency.

In summary, the GE JT965 gas turbine engine epitomizes modern engineering excellence, with its high thermal efficiency, advanced materials, and innovative design features. Its adaptability to different fuel types and ease of maintenance make it a compelling choice for power generation and industrial users, setting a benchmark for future developments in the field of gas turbine technology.