GE JTP17, JKP15 Care and cleaning of the oven, How to Remove Packaging Tape, Lift-Off Oven Door

Page 19

Care and cleaning of the oven.

Be sure electrical power is off and all surfaces are cool before cleaning any part of the oven.

Safety

How to Remove Packaging Tape

To assure no damage is done to the finish of the product, the safest way to remove the adhesive left from packaging tape on new appliances is an application of a household liquid dishwashing detergent, mineral oil or cooking oil.

Apply with a soft cloth and allow to soak. Wipe dry and then apply an appliance polish to thoroughly clean and protect the surface.

NOTE: The plastic tape must be removed from all chrome trim. It cannot be removed if it is baked on.

Instructions Operating

Lift the door straight up and off the hinges.

The gasket is designed with a gap at the bottom to allow for proper air circulation.

Do not rub or clean the door gasket—it has an extremely low resistance to abrasion.

If you notice the gasket becoming worn, frayed or damaged in any way or if it has become displaced on the door, you should have it replaced.

Lift-Off Oven Door

The oven door is removable for easier access to the light bulb.

Do not lift the door by the handle.

To remove the door, open it to the broil stop position. Grasp firmly on each side and lift the door straight up and off the hinges.

Do not place hands between the hinge and the oven door frame.

To replace the door, make sure the hinges are in the broil stop position. Position the slots in the bottom of the door squarely over the hinges and slowly lower it over both hinges.

To clean the inside of the door:

Because the area inside the gasket is cleaned during the self-clean cycle, you do not need to clean this by hand.

The area outside the gasket and the front frame can be cleaned with a soap- filled steel wool or plastic pad, hot water and detergent. Rinse well with a vinegar and water solution.

To clean the outside of the door:

Use soap and water to thoroughly clean the top, sides and front of the oven door. Rinse well. You may also use a glass cleaner to clean the glass on the outside of the door. Do not let water drip into the vent openings.

Spillage of marinades, fruit juices, tomato sauces and basting materials containing acids may cause discoloration and should be wiped up immediately. When surface is cool, clean and rinse.

Do not use oven cleaners, cleaning powders or harsh abrasives on the outside of the door.

Instructions Care and Cleaning Troubleshooting Tips

Oven Heating Elements

Do not clean the bake element or the broil

To clean the oven floor, gently lift

element. Any soil will burn off when the elements

the bake element. Clean with warm

are heated.

soapy water.

 

19

Customer Service

Image 19
Contents Wall OvenBuilt-In Electric Two easy ways to register your appliance GE & You, a Service PartnershipStaple sales slip or cancelled check here Write the model and serial numbers hereImportant Safety Notice Instructions Care and Cleaning Customer ServiceOven Control, Clock and Timer Features and Settings Using the oven controlsHour Shut-Off Special features of your oven controlCare and Cleaning Fahrenheit or Celsius Temperature SelectionYour control is set to use a 12 hour clock InstructionsTones at the End of a Timed Cycle Hour, 24 Hour or Clock Black-OutCook and Hold Safety Instructions OperatingChanging the Speed of the + or Pads Customer Service Troubleshooting Tips Safety InstructionsHow to Set for Regular Baking/Roasting How to Exit the Sabbath Feature Safety Using the ovenTips Broiling Guide How to Set the Oven for BroilingHI Broil To Cancel the Timer Using the clock and timerTo Set the Timer To Reset the TimerSafety Instructions Using the timed baking and roasting featuresHow to Set an Immediate Start and Automatic Stop How to Set a Delayed Start and Automatic StopTo Adjust the Thermostat Adjust the oven thermostat-Do it yourselfType of margarine will affect baking performance Oven must be cool in order to set the self- clean cycle Using the self-cleaning ovenBefore a Clean Cycle How to Set the Oven for CleaningAfter a Clean Cycle Customer Service Troubleshooting Tips CareHow to Delay the Start of Cleaning Oven Heating Elements Care and cleaning of the ovenHow to Remove Packaging Tape Lift-Off Oven DoorInstructions Safety Oven Light Bulb on some models Stainless Steel Surfaces on some modelsProblem Possible Causes What To Do Before You Call For Service…Hot or too cold During clean cycleOpen after a Clean cycle Is on when you wantDisplay goes blank Power outageA number Or letter flashWe’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration Warrantor General Electric Company. Louisville, KY GE Built-In Electric Oven WarrantyGE Will Replace What GE Will Not CoverGE Answer Center Service Telephone Numbers

JRP15, JTP17, JKP15 specifications

GE's JKP15, JTP17, and JRP15 models stand out as exceptional units in the landscape of commercial and industrial gas turbines, each designed to cater to various operational needs. These turbines incorporate advanced technologies and innovations, making them suitable for a wide range of applications from power generation to mechanical drive.

The GE JKP15 turbine is renowned for its efficient energy conversion, showcasing a robust design that ensures high reliability and longevity. It typically features a modular layout, which allows for easy maintenance and reduced downtime, leading to enhanced operational efficiency. The JKP15 utilizes state-of-the-art materials and cooling technologies to maintain performance under high thermal conditions, ensuring optimal efficiency rates and lower emissions.

In contrast, the JTP17 model is designed for larger-scale applications. This turbine integrates advanced aerodynamic designs that increase its efficiency and performance under various load conditions. The JTP17 is equipped with a digital control system, which enhances operational flexibility and process optimization. Its combustion system is engineered to minimize NOx emissions, making it compliant with stringent environmental regulations, thus enhancing its appeal to environmentally conscious operators.

The JRP15, on the other hand, is a versatile model that serves both the power generation sector and industrial applications. It features high operational versatility, allowing for swift changes between different fuel types. The JRP15 is made with advanced engineering techniques, which contribute to its high reliability and low maintenance needs. Its ability to handle fluctuating load demands makes it a prime choice for operators seeking both capacity and efficiency.

All three models share a commitment to advanced monitoring technologies that use real-time data analytics to predict maintenance needs, enhancing their reliability and lifespan. GE's focus on integrating IoT capabilities allows for comprehensive system integration and energy management, paving the way for smarter energy solutions.

In summary, GE's JKP15, JTP17, and JRP15 turbines collectively represent the pinnacle of engineering excellence in gas turbine technology. Their distinct features, from modular designs and digital control systems to low-emission combustion technologies, underscore GE's commitment to innovation, efficiency, and sustainability in energy production. Whether for power generation or industrial uses, these turbines offer reliable solutions that meet the diverse needs of today’s energy landscape.