GE JKP15, JTP17, JRP15 owner manual Important Safety Notice

Page 3

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life.

IMPORTANT SAFETY NOTICE

The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California to publish a list of substances known to the state to cause cancer, birth defects or other reproductive harm, and requires businesses to warn customers of potential exposure to such substances.

The fiberglass insulation in self-clean ovens gives off a very small amount of carbon monoxide during the cleaning cycle. Exposure can be minimized by venting with an open window or using a ventilation fan or hood.

IMPORTANT: The health of some birds is extremely sensitive to the fumes given off during the self-cleaning cycle of any oven. Move birds to another well ventilated room.

SAFETY PRECAUTIONS

When using electrical appliances, basic safety precautions should be followed, including the following:

Safety Instructions Operating Instructions Care and

Use this appliance only for its intended purpose as described in this Owner’s Manual.

Be sure your appliance is properly installed and grounded by a qualified technician in accordance with the provided installation instructions.

Do not attempt to repair or replace any part of your oven unless it is specifically recommended in this manual. All other servicing should be referred to a qualified technician.

Have the installer show you the location of the circuit breaker or fuse. Mark it for easy reference.

Before performing any service, disconnect the oven power supply at the household distribution panel by removing the fuse or switching off the circuit breaker.

Do not leave children alone—children should not be left alone or unattended in an area where an appliance is in use. They should never be allowed to sit or stand on any part of the appliance.

Do not allow anyone to climb, stand or hang on the door. They could damage the oven, or cause severe personal injury.

Be sure the oven is securely installed in a cabinet that is firmly attached to the house structure. Never allow anyone to climb, sit, stand or hang on the oven door.

Never leave the oven door open when you are not watching the oven.

Always keep combustible wall covering, curtains or drapes a safe distance from your oven.

Always keep dish towels, dish cloths, pot holders and other linens a safe distance from your oven.

Always keep wooden and plastic utensils and canned food a safe distance away from your oven.

Teach children not to play with the controls or any other part of the oven.

Cleaning Troubleshooting Tips Customer Service

3

Image 3
Contents Wall OvenBuilt-In Electric Two easy ways to register your appliance GE & You, a Service PartnershipStaple sales slip or cancelled check here Write the model and serial numbers hereImportant Safety Notice Instructions Care and Cleaning Customer ServiceOven Control, Clock and Timer Features and Settings Using the oven controlsHour Shut-Off Special features of your oven controlCare and Cleaning Fahrenheit or Celsius Temperature SelectionYour control is set to use a 12 hour clock InstructionsTones at the End of a Timed Cycle Hour, 24 Hour or Clock Black-OutSafety Instructions Operating Cook and HoldChanging the Speed of the + or Pads Safety Instructions Customer Service Troubleshooting TipsHow to Set for Regular Baking/Roasting How to Exit the Sabbath Feature Using the oven SafetyTips How to Set the Oven for Broiling Broiling GuideHI Broil To Cancel the Timer Using the clock and timerTo Set the Timer To Reset the TimerSafety Instructions Using the timed baking and roasting featuresHow to Set an Immediate Start and Automatic Stop How to Set a Delayed Start and Automatic StopAdjust the oven thermostat-Do it yourself To Adjust the ThermostatType of margarine will affect baking performance Oven must be cool in order to set the self- clean cycle Using the self-cleaning ovenBefore a Clean Cycle How to Set the Oven for CleaningCustomer Service Troubleshooting Tips Care After a Clean CycleHow to Delay the Start of Cleaning Oven Heating Elements Care and cleaning of the ovenHow to Remove Packaging Tape Lift-Off Oven DoorInstructions Safety Oven Light Bulb on some models Stainless Steel Surfaces on some modelsProblem Possible Causes What To Do Before You Call For Service…Hot or too cold During clean cycleOpen after a Clean cycle Is on when you wantDisplay goes blank Power outageA number Or letter flashWe’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration Warrantor General Electric Company. Louisville, KY GE Built-In Electric Oven WarrantyGE Will Replace What GE Will Not CoverGE Answer Center Service Telephone Numbers

JRP15, JTP17, JKP15 specifications

GE's JKP15, JTP17, and JRP15 models stand out as exceptional units in the landscape of commercial and industrial gas turbines, each designed to cater to various operational needs. These turbines incorporate advanced technologies and innovations, making them suitable for a wide range of applications from power generation to mechanical drive.

The GE JKP15 turbine is renowned for its efficient energy conversion, showcasing a robust design that ensures high reliability and longevity. It typically features a modular layout, which allows for easy maintenance and reduced downtime, leading to enhanced operational efficiency. The JKP15 utilizes state-of-the-art materials and cooling technologies to maintain performance under high thermal conditions, ensuring optimal efficiency rates and lower emissions.

In contrast, the JTP17 model is designed for larger-scale applications. This turbine integrates advanced aerodynamic designs that increase its efficiency and performance under various load conditions. The JTP17 is equipped with a digital control system, which enhances operational flexibility and process optimization. Its combustion system is engineered to minimize NOx emissions, making it compliant with stringent environmental regulations, thus enhancing its appeal to environmentally conscious operators.

The JRP15, on the other hand, is a versatile model that serves both the power generation sector and industrial applications. It features high operational versatility, allowing for swift changes between different fuel types. The JRP15 is made with advanced engineering techniques, which contribute to its high reliability and low maintenance needs. Its ability to handle fluctuating load demands makes it a prime choice for operators seeking both capacity and efficiency.

All three models share a commitment to advanced monitoring technologies that use real-time data analytics to predict maintenance needs, enhancing their reliability and lifespan. GE's focus on integrating IoT capabilities allows for comprehensive system integration and energy management, paving the way for smarter energy solutions.

In summary, GE's JKP15, JTP17, and JRP15 turbines collectively represent the pinnacle of engineering excellence in gas turbine technology. Their distinct features, from modular designs and digital control systems to low-emission combustion technologies, underscore GE's commitment to innovation, efficiency, and sustainability in energy production. Whether for power generation or industrial uses, these turbines offer reliable solutions that meet the diverse needs of today’s energy landscape.