GE JTP17, JKP15, JRP15 owner manual Instructions

Page 4

Instructions

IMPORTANT SAFETY INFORMATION. READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

SAFETY PRECAUTIONS

Customer Service Troubleshooting Tips Care and Cleaning Operating Instructions Safety

■Do not store flammable materials in an oven.

■CAUTION: Items of interest to children should not be stored in cabinets above an oven; children climbing on the oven to reach items could be seriously injured.

■Never wear loose-fitting or hanging garments while using the appliance. Be careful when reaching for items stored in cabinets over the oven. Flammable material could be ignited if brought in contact with hot surfaces or heating elements and may cause severe burns.

■Use only dry pot holders—moist or damp pot holders on hot surfaces may result in burns from steam. Do not let pot holders touch hot heating elements. Do not use a towel or other bulky cloth.

■For your safety, never use your appliance for warming or heating the room.

■Do not let cooking grease or other flammable materials accumulate in or near the oven.

■Do not use water on grease fires. Never pick up a flaming pan. Turn the controls off.

■Flame in the oven can be smothered completely by closing the oven door and turning the oven off or by using a multi- purpose dry chemical or foam-type fire extinguisher.

■Never leave jars or cans of fat drippings in or near your oven.

■Do not store or use combustible materials, gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

■Stand away from the oven when opening the oven door. Hot air or steam which escapes can cause burns to hands, face and/or eyes.

■Do not heat unopened food containers. Pressure could build up and the container could burst, causing an injury.

■Keep the oven vent unobstructed.

■Keep the oven free from grease buildup.

■Place the oven shelf in the desired position while the oven is cool. If shelves must be handled when hot, do not let pot holder contact the heating elements.

■When using cooking or roasting bags in the oven, follow the manufacturer’s directions.

■Do not touch the heating elements or the interior surface of the oven. These surfaces may be hot enough to burn even though they are dark in color. During and after use, do not touch, or let clothing or other flammable materials contact any interior area of the oven; allow sufficient time for cooling first.

■Potentially hot surfaces include oven vent openings, surfaces near the openings, crevices around the oven door, the edges of the window and metal trim parts above the door.

■REMEMBER: The inside surface of the oven may be hot when the door is opened.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Wall OvenBuilt-In Electric GE & You, a Service Partnership Staple sales slip or cancelled check hereWrite the model and serial numbers here Two easy ways to register your applianceImportant Safety Notice Instructions Customer Service Care and CleaningUsing the oven controls Oven Control, Clock and Timer Features and SettingsSpecial features of your oven control Care and CleaningFahrenheit or Celsius Temperature Selection Hour Shut-OffInstructions Tones at the End of a Timed CycleHour, 24 Hour or Clock Black-Out Your control is set to use a 12 hour clockCook and Hold Safety Instructions OperatingChanging the Speed of the + or Pads Customer Service Troubleshooting Tips Safety InstructionsHow to Set for Regular Baking/Roasting How to Exit the Sabbath Feature Safety Using the ovenTips Broiling Guide How to Set the Oven for BroilingHI Broil Using the clock and timer To Set the TimerTo Reset the Timer To Cancel the TimerUsing the timed baking and roasting features How to Set an Immediate Start and Automatic StopHow to Set a Delayed Start and Automatic Stop Safety InstructionsTo Adjust the Thermostat Adjust the oven thermostat-Do it yourselfType of margarine will affect baking performance Using the self-cleaning oven Before a Clean CycleHow to Set the Oven for Cleaning Oven must be cool in order to set the self- clean cycleAfter a Clean Cycle Customer Service Troubleshooting Tips CareHow to Delay the Start of Cleaning Care and cleaning of the oven How to Remove Packaging TapeLift-Off Oven Door Oven Heating ElementsInstructions Safety Stainless Steel Surfaces on some models Oven Light Bulb on some modelsBefore You Call For Service… Problem Possible Causes What To DoDuring clean cycle Open after a Clean cycleIs on when you want Hot or too coldPower outage A numberOr letter flash Display goes blankWe’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration GE Built-In Electric Oven Warranty GE Will ReplaceWhat GE Will Not Cover Warrantor General Electric Company. Louisville, KYService Telephone Numbers GE Answer Center

JRP15, JTP17, JKP15 specifications

GE's JKP15, JTP17, and JRP15 models stand out as exceptional units in the landscape of commercial and industrial gas turbines, each designed to cater to various operational needs. These turbines incorporate advanced technologies and innovations, making them suitable for a wide range of applications from power generation to mechanical drive.

The GE JKP15 turbine is renowned for its efficient energy conversion, showcasing a robust design that ensures high reliability and longevity. It typically features a modular layout, which allows for easy maintenance and reduced downtime, leading to enhanced operational efficiency. The JKP15 utilizes state-of-the-art materials and cooling technologies to maintain performance under high thermal conditions, ensuring optimal efficiency rates and lower emissions.

In contrast, the JTP17 model is designed for larger-scale applications. This turbine integrates advanced aerodynamic designs that increase its efficiency and performance under various load conditions. The JTP17 is equipped with a digital control system, which enhances operational flexibility and process optimization. Its combustion system is engineered to minimize NOx emissions, making it compliant with stringent environmental regulations, thus enhancing its appeal to environmentally conscious operators.

The JRP15, on the other hand, is a versatile model that serves both the power generation sector and industrial applications. It features high operational versatility, allowing for swift changes between different fuel types. The JRP15 is made with advanced engineering techniques, which contribute to its high reliability and low maintenance needs. Its ability to handle fluctuating load demands makes it a prime choice for operators seeking both capacity and efficiency.

All three models share a commitment to advanced monitoring technologies that use real-time data analytics to predict maintenance needs, enhancing their reliability and lifespan. GE's focus on integrating IoT capabilities allows for comprehensive system integration and energy management, paving the way for smarter energy solutions.

In summary, GE's JKP15, JTP17, and JRP15 turbines collectively represent the pinnacle of engineering excellence in gas turbine technology. Their distinct features, from modular designs and digital control systems to low-emission combustion technologies, underscore GE's commitment to innovation, efficiency, and sustainability in energy production. Whether for power generation or industrial uses, these turbines offer reliable solutions that meet the diverse needs of today’s energy landscape.
Top Page Image Contents