GE JT952SKSS Care and Cleaning Troubleshooting Tips, Cleaning the Oven Door, Lift-Off Oven Door

Page 23

ge.com

Safety

Do not rub or clean the door gasket— it has an extremely low resistance to abrasion.

If you notice the gasket becoming worn, frayed or damaged in any way or if it has become displaced on the door, you should have it replaced.

Cleaning the Oven Door

To clean the inside of the door:

Because the area inside the gasket is cleaned during the self-clean cycle, you do not need to clean this by hand.

The area outside the gasket and the door liner can be cleaned with a soap-filled or plastic scouring pad, hot water and detergent. Rinse well with a vinegar and water solution.

To clean the outside of the door:

Use soap and water to thoroughly clean the top, sides and front of the oven door. Rinse well. You may also use a glass cleaner to clean the glass

on the outside of the door. Do not let water drip into the vent openings.

If any stain on the door vent trim is persistent, use a soft abrasive cleaner and a sponge-scrubber for best results.

Spillage of marinades, fruit juices, tomato sauces and basting materials containing acids may cause discoloration and should be wiped up immediately. When surface is cool, clean and rinse.

Do not use oven cleaners, cleaning powders or harsh abrasives on the outside of the door.

Instructions Operating Instructions

Slot

Hinge lock

Pull hinge locks down to unlock

Removal position

Lift-Off Oven Door

The door is very heavy. Be careful when removing and lifting the door.

Do not lift the door by the handle.

To remove the door:

Fully open the door.

Pull the hinge locks down toward the door frame, to the unlocked position. A tool, such as a small flat- blade screwdriver, may be required.

Firmly grasp both sides of the door at the top.

Close door to the door removal position, which is halfway between the broil stop position and fully closed.

Lift door up and out until the hinge arm is clear of the slot.

To replace the door:

Firmly grasp both sides of the door at the top.

With the

Bottom

Hinge arm

door at the

edge

 

same angle as

of slot

 

the removal

 

 

position, seat the

 

indentation of

 

 

the hinge arm

 

Indentation

into the bottom

 

edge of the hinge slot. The notch in

the hinge arm must be fully seated

into the bottom of the slot.

 

Fully open the door. If the door will not fully open, the indentation is not seated correctly in the bottom edge of the slot.

Push the hinge locks up against the front frame of the oven cavity, to the locked position.

Hinge arm

Hinge lock

Care and Cleaning Troubleshooting Tips

Push hinge locks up to lock

Close the oven door.

Removable Oven Floor

To remove the oven floor:

Remove the oven door using the instructions in the Lift-Off Oven Door section.

Press down and pull out the removable oven floor.

Press down and pull out.

Clean the oven floor with warm soapy water.

When reinstalling the oven floor, be sure to slide it all the way to the back of the oven.

IMPORTANT: Always replace the

23

removable floor before the next use.

Consumer Support

Image 23
Contents Write the model and serial numbers here Model # Serial # Built-In OvenConsumer Support Troubleshooting Tips Care and Cleaning Operating Instructions Safety InstructionsGe.com Cleaning Operating Instructions Consumer Support Troubleshooting Tips CareSupport Using the oven controlsTroubleshooting Tips Consumer Consumer Support Special features of your oven controlSafety Instructions Fahrenheit or Celsius Temperature SelectionTones at the End of a Timed Cycle SafetyTone Volume Instructions OperatingCook and Hold InstructionsHow to Exit the Sabbath Feature Using the Sabbath FeatureCleaning Troubleshooting How to Set for Regular Baking/RoastingTroubleshooting Tips Using the ovenCare and Cleaning Broiling Guide How to Set the Oven for BroilingSafety Instructions OperatingUsing the clock, timer and control lockout Tips Consumer Support Safety InstructionsHow to Set an Immediate Start and Automatic Stop How to Set a Delayed Start and Automatic StopHow to Set the Oven For Roasting When Using the Probe Using the probeMulti-Shelf Convection Baking Using the convection ovenSafety Convection BakePaper and Plastic Care and Cleaning OperatingHow to Set the Oven for Convection Baking or Roasting Convection RoastPress the Convection Roast pad Troubleshooting Tips Consumer SupportConvection Roasting Guide Press the Convection Bake or Convection Roast pad Using the timed features for convection cookingConsumer Support Troubleshooting Tips Type of margarine will affect baking performance Adjust the oven thermostat-Do it yourselfCleaning Troubleshooting Tips Consumer Support To Adjust the ThermostatHow to Set the Oven for Cleaning Using the self-cleaning ovenBefore a Clean Cycle Troubleshooting Tips Care and CleaningHow to Delay the Start of Cleaning Cleaning Troubleshooting Tips Consumer SupportAfter a Clean Cycle Oven Light Bulb Care and cleaning of the ovenInstructions Safety How to Remove Protective Shipping Film and Packaging TapeRemovable Oven Floor Care and Cleaning Troubleshooting TipsCleaning the Oven Door Lift-Off Oven DoorOven Heating Elements Operating InstructionsProbe Oven ShelvesControl Panel Problem Possible Causes What To Do Before You Call For Service…Hot or too cold See the Using the self-cleaning oven sectionDuring clean cycle Not open after a Clean cycleOr letter flash See the Special features of your oven control sectionPower outage A numberWe’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration What GE Will Not Cover GE Built-In Electric Oven WarrantySafety Instructions Operating Instructions GE Will ReplaceReal Life Design Studio Schedule ServiceParts and Accessories Consumer Support GE Appliances Website