Safety Precautions, Ge.com | GE JT96530 specs

■ This appliance should be serviced only by qualified service personnel. Contact nearest authorized service facility for examination, repair or adjustment. Do not repair or replace any part of this appliance unless specifically recommended in this manual. All other servicing should be referred to a qualified technician.

installed in a cabinet that is firmly attached to the house structure. Weight on the oven door could cause the oven to tip and result in injury. Never allow anyone to climb, sit or hang on the oven door.

■ Have the installer show you the location of the circuit breaker or fuse. Mark it for easy reference.

installed and grounded by a qualified technician in accordance with the provided Installation Instructions.

WARNING—Grounding Instructions: This appliance must be connected to a grounded, metallic, permanent wiring system, or an equipment grounding conductor should be run with the circuit conductors and connected to the equipment grounding terminal or lead on the appliance.

WARNING—To reduce the risk of burns, electric shock, fire, injury to persons or exposure to excessive microwave energy:

■ Use this appliance only for its intended use as described in this manual. Do not use corrosive chemicals or vapors in this appliance. This cooking center is specifically designed to heat or cook food, and is not intended for laboratory or industrial use.

ge.com

SAFETY PRECAUTIONS

When using electrical appliances, basic safety precautions should be followed, including the following:

■ Do not store this appliance outdoors. Do not use this product near water— for example, in a wet basement, or near a swimming pool.

■ Before performing any service, disconnect the cooking center power supply at the household distribution panel by removing the fuse or switching off the circuit breaker.

■ Do not operate this appliance if it has a damaged cord or plug, if it is not working properly or if it has been damaged or dropped.

■ Do not leave children alone—children should not be left alone or unattended in an area where appliance is in use. They should never be allowed to sit or stand on any part of the appliance.

■ Don’t allow anyone to climb, stand or

■ Be sure your appliance is properly

hang on the door. They could damage the cooking center and cause severe personal injury.

■ CAUTION: Items of interest to children should not be stored in cabinets above an oven; children climbing on the

Safety Instructions Operating Instructions Care and Cleaning

■ Be sure the cooking center is securely

oven to reach items could be seriously injured.

■ Teach children not to play with the controls or any other part of the cooking center.

■ Large scratches or impacts to glass door

can lead to broken or shattered glass.

■ Wear proper clothing. Loose-fitting or hanging garments should never be worn while using the appliance. Flammable material could be ignited if brought in contact with hot heating elements and may cause severe burns.

Troubleshooting Tips Consumer Support

JT96530 specifications

The GE JT96530 is a cutting-edge jet engine that represents a significant advancement in aviation technology, specifically designed for use in regional and narrow-body aircraft. As the industry continues to evolve towards increased fuel efficiency and reduced emissions, the JT96530 stands out for its performance, state-of-the-art engineering, and innovative features.

One of the main highlights of the GE JT96530 is its high bypass ratio, which contributes to improved fuel efficiency. The engine's design allows for a larger volume of air to bypass the core engine compared to the amount that goes through the combustion chamber. This not only enhances fuel burn efficiency but also reduces noise, making it an environmentally friendly option for airlines and airports. The incorporation of advanced materials, including lightweight titanium and composite components, further optimizes performance and durability while keeping the engine lightweight.

Technologically, the JT96530 is equipped with advanced digital engine controls that enable precise management of engine performance throughout various phases of flight. This system enhances operational efficiency by allowing for real-time monitoring and adjustments, optimizing fuel consumption, and improving overall engine reliability. The engine's design incorporates a staggered fan blade layout, which enhances airflow and further increases efficiency and thrust.

Additionally, the JT96530 features a robust cooling system that ensures parts are maintained at optimal temperatures, enhancing overall engine longevity. The advanced thermal management techniques not only improve performance but also extend maintenance intervals, reducing operational costs for airlines.

The engine’s maintenance is simplified by the modular design, allowing for quick and efficient servicing. Operators benefit from reduced downtime, increasing aircraft availability and overall operational efficiency. The JT96530 is also designed with a focus on sustainability, aligning with global initiatives to decrease carbon emissions in aviation, making it a preferred choice for environmentally conscious operators.

In summary, the GE JT96530 engine combines advanced aerodynamics, innovative materials, and state-of-the-art technology, setting a new standard in the aviation industry. Its remarkable efficiency, reduced environmental impact, and ease of maintenance make it an ideal choice for airlines looking to modernize their fleet while meeting the demands of a rapidly changing world. This engine not only delivers exceptional performance but also reflects a commitment to sustainable aviation for the future.