Installation Instructions
Pre-Installation Checklist
Remove packaging materials, literature package and the conversion kit from the cooktop before beginning installation.
Literature Package
Styrofoam
Packaging
Cooktop
Remove packaging tape. To assure no damage is done to the finish of the product, the safest way to remove the adhesive left from packaging tape on new appliances is an application of
a household liquid dishwashing detergent, mineral oil or cooking oil.
Apply with a soft cloth and allow to soak. Wipe dry and then apply an appliance polish to thoroughly clean and protect the surface.
NOTE: The plastic tape must be removed from all chrome trim. It cannot be removed if it is baked on.
Be sure to place all literature and the conversion kit in a safe place for future use.
Make sure you have all the tools and materials you need before starting the installation of the cooktop.
When preparing cooktop opening, make sure the inside of the cabinet and the cooktop do not interfere with each other. (See section on preparing the opening.)
Your home must provide the adequate electrical service needed to safely and properly use your cooktop. (Refer to section on electrical requirements.)
When installing your cooktop in your home, make sure all local codes and ordinances are followed exactly as stated.
Make sure the wall coverings, countertop and cabinets around the cooktop can withstand heat (up to 200°F) generated by the cooktop.
17