GE PDE9900 manual Service Mode, Description Time

Service Mode

This dishwasher is programmed with a service mode to aid the technician in troubleshooting the dishwasher. Each component may be cycled to detect if it is functioning correctly. Components are cycled by pressing keypads to the right or the left of the Start/Reset keypad.

PDW8900 Series

To enter service mode, press and hold the Cookware and Heated Dry keypads simultaneously for 3 seconds. To exit service mode, press the Start/Reset keypad at any time.

!1DCC>=
5;0C1>F43
?0=4;

1>F43
?0=4;
B7>F=

PAD	Description	Time
1L	Not Used
2L	Activates/Deactivates Auxiliary Pump	Variable
3L	Activates/Deactivates Main Pump and
	Single Rack Wash Motor (Wax Motor)	Variable
1R	Activates/Deactivates Detergent Cup	Variable
2R	Activates/Deactivates Water Valve and
	Smart Detergent Dispenser	Variable
3R	Not Used
4R	Activates/Deactivates Heater	6 min.

PDW9700 Series and PDW9900 Series

To enter service mode, press and hold the "Down" arrow and Heated Dry keypads simultaneously for 3 seconds. To exit service mode press the Start/Reset at any time.

&1DCC>=
C>?
2>=CA>;
?0=4;

PAD	Description	Time
1L	Activates/Deactivates Heater and Fan	Test times out after 6 minutes.
2L	Not Used
3L	Activates/Deactivates Water Valve and
	Smart Detergent Dispenser	Variable
4L	Activates/Deactivates Detergent Cup	Variable
5L	Activates/Deactivates Auxiliary Pump	Variable
6L	Activates/Deactivates Main Pump and
	Single Rack Wash Motor (Wax Motor)	Variable

*Note: Service mode may be used for 30 minutes maximum. After 30 minutes, the service mode will automatically turn off.

– 32 –