Control Features
Throughout this manual, features and appearance may vary from your model.
PDW8900 Series |
| 1 | 6 |
| 2 |
|
|
|
|
| |||
| 3 |
|
| 5 | 4 |
|
PDW9700 Series and PDW9900 Series |
|
|
| 1 | 5 | |
|
|
|
|
| ||
SPEED CYCLE | SINGLE RACK WASH |
| Smart Dispense | DRYING | ||
| LOW DETERGENT | |||||
COOKWARE | CHINA CYCLE | RINSE ONLY |
|
| SENSING | SANITIZED |
NORMAL | PLASTIC CYCLE |
|
|
| WASHING | CLEAN |
2 | 3 |
|
|
| 4 | 6 |
Control Settings
1
2
Status Indicator Lights (Indicators vary by models)
The Status display tells you what is happening while the dishwasher is in operation and may flash, indicating a malfunction. The lights will come ON indicating the sequence of the dishwasher operation.
LOW DETERGENT Displayed when the SmartDispense needs to be refilled with liquid or gel automatic dishwasher detergent.
SENSING Displayed while the Clean Sensor™ is measuring the amount of soil and temperature of water. The dishwasher will adjust the selected cycle to achieve optimal performance.
WASHING Displayed during prewash, main wash and rinse periods.
DRYING Displayed during HEATED DRY.
SANITIZED Displayed when cycle has met sanitization conditions.
CLEAN Displayed when a wash cycle is complete.
Time Remaining Display (on some models)
During operation, the display shows the minutes remaining until the cycle is complete. The display may adjust the remaining time while the Sensing light is on. The time displayed at the start of each cycle may change from the factory setting as the unit customizes itself to home use. During a delay start, the display will show hours of time remaining until the cycle starts.
– 6 –