GE 500A200P047 Care and Cleaning, Care of the Dishwasher Top, Care & Cleaning of the Dishwasher

Page 13
PUMP COVER SCREWS

CARE AND CLEANING

USER MAINTENANCE INSTRUCTIONS

Clean the control panel with a lightly dampened cloth. Dry thoroughly. Do not use abrasive or sharp objects on the panel. They can damage it.

Clean the outside with a good appliance polish wax. The outside cabinet finish is durable, but it can scratch. So use no scouring pads, or harsh or gritty cleaners.

The inside usually takes care of itself. If it should ever need cleaning, use a mild cleansing powder. Scouring pads and harsh cleaners can mar the finish.

Alternatively, to remove stains inside the PermaTuf¨ tub or, if you wish to refresh the inside of your unit (including the water distribution system), you may also use citric acid. Fill both detergent cups completely with citric acid and run dishwasher through a full cycle without any dishes. You may repeat as often as you feel necessary.

Citric acid is widely available in powder form at most drugstores across the country. Do not use liquid bleach.

DO NOT USE LIQUID BLEACH

Optional Accessories

Not Using Your Dishwasher in Winter? Protect Against Freezing.

(On built-in models only)

If your dishwasher is left in an unheated place during the winter, ask a service technician to:

¥Cut off electrical power to the dishwasher. Remove fuses or trip circuit breaker.

¥Turn off the water supply.

¥Disconnect the water inlet line from the water valve.

¥Drain water from the inlet line and water valve. (Use a pan to catch the water.)

¥ Reconnect the water inlet line to the water valve.

¥ Drain collection chamber at rear of unit below filter by disconnecting hose to pump. Reconnect after draining.

¥Remove the plastic pump

cover in the tub bottom and use a sponge to soak up water in the

rubber boot.

Care of the Dishwasher Top

Before using, wipe well with a dry cloth to

permanently. Never let water stand on the

remove surface dust. Do not use the top of your

dishwasher top.

dishwasher as a cutting board. It can be scarred

 

Care & Cleaning of the Dishwasher

Care and Cleaning

Cleaning – Outside

The following are Options for Cleaning Stainless Steel:

1.Use soap and water, rinse with clean water and dry with a cotton cloth.

2.Use Stainless Steel Magic or a similar product. It is available from your parts dealer. Be sure to follow the manufacturers instructions.

3.Use a thick paste or baking soda and water. Rub with a soft cloth.

4.Use a non-detergent based cleaner (eg. Formula 409 Glass and Surface cleaner).

Do not use steel wool, acids, abrasives, ammonia or a commercial oven cleaner.

These instructions apply to Stainless Steel surfaces, and could damage other surfaces.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Use and Care Guide If you received a damaged dishwasher… Read all instructions before using this appliance Important Safety InstructionsImportant Safety Instructions To minimize the possibility of injuryHOW to USE the Unicouple Electrical requirements How to Connect Unicouple HOW to Connect ElectricityHow to Connect ElectricityModels With Delay HOW to Operate Your DishwasherModels Without Delay Instructions HOW to GET Started 3 Easy StepsHow to Use a Rinse Agent How to Test Water TemperatureTo get dishes clean and dry you need hot water How to fill the rinse agent dispenserHot Water Loading Detergent How to Choose and Use the Right DetergentRinse Agents DetergentsPlace settings HOW to Load Your DishwasherUpper Rack Lower RackSilverware Baskets Wash TowerKeep the center area clear in the lower rack DonÕt let any item extend through bottomDescriptions of Optional Accessories About Optional AccessoriesConversion Kit ¥ GPF325A Almond ¥ GPF325B Black ¥ GPF325W WhiteCare & Cleaning of the Dishwasher Care and CleaningBefore using, wipe well with a dry cloth to Care of the Dishwasher TopYES What YOU can Usually Wash Safely Your DishwasherGlass YES Materials YOU will Need BUILT-IN Dishwasher Installation InstructionsFollow local codes and ordinances Prepare Drain PlumbingInstallation Prepare Electrical WiringDishwasher Sold With Power Cord Do not install receptacle in cabinet opening for dishwasherFigure H Remove access panel and toekick Remove leveling legs and wood base Install Leveling legsAlign water and electrical lines Position water line and power supplyLevel dishwasher Position dishwasher and fasten to cabinetOxidant compound and aluminum-to-copper connectors InstallerConnect drain line Follow all local codes and ordinancesReplace access panel and toekick Pre-test check list „ Check to be sure power is off„ Turn on water supply Dishwasher wet test check listQUESTIONS? USE this Problem Solver To remove stubborn spots and film from glassware Problem SolverStanding in the Bottom Problem Possible Cause Small Amount of WaterTUB Water Wonõt Pump OUT TUBProblem Solver Camco Service Camco ServicePrepare Enclosure for AN Undersink Dishwasher To continue installation go to

500A200P047 specifications

The GE 500A200P047 is a notable component within General Electric's extensive portfolio of innovative technologies. Widely recognized for its robust design and high performance, this device plays a pivotal role in various applications, particularly in industrial automation and power systems.

One of the standout features of the GE 500A200P047 is its exceptional reliability. Engineered for demanding environments, it is built to withstand extreme temperatures, vibrations, and other challenging conditions that are common in industrial settings. This reliability ensures that the component maintains optimal performance over time, reducing downtime and maintenance costs for operators.

The GE 500A200P047 also incorporates state-of-the-art technology aimed at enhancing efficiency and functionality. It features advanced digital controls, which allow for precise monitoring and management of electrical systems. This technological integration not only optimizes power distribution but also contributes to energy savings, making it an eco-friendly choice for enterprises looking to reduce their carbon footprint.

Furthermore, this component is designed with versatility in mind. It supports a range of applications, from low-voltage distributions to high-power industrial machinery. This adaptability makes the GE 500A200P047 a preferred choice among engineers and designers who require flexibility in their designs while ensuring top-tier performance.

Another notable characteristic of the GE 500A200P047 is its user-friendly interface. The design includes intuitive controls and diagnostic tools, facilitating easier operation and troubleshooting. This user-centric approach simplifies the complexity often associated with industrial systems, enabling quicker resolution of issues and enhancing overall productivity.

In terms of safety, the GE 500A200P047 is equipped with multiple safety features designed to protect both the system and its operators. These safety technologies prevent overload, short circuits, and other hazardous conditions, ensuring that operations run smoothly and securely.

In conclusion, the GE 500A200P047 stands out as a powerhouse in the industrial technology sector. With its impressive reliability, advanced digital controls, versatility, user-friendly interface, and robust safety features, it serves as a crucial component in modern industrial networks. Organizations looking to enhance efficiency and reliability in their operations will find the GE 500A200P047 to be an invaluable addition to their technological arsenal.
Top Page Image Contents